English - 16ADJUSTING THE HEIGHT OF THE UPPER RACKYou can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack canaccommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack canaccommodate plates up to 12 in. (30 cm) in diameter and the upper rack can accommodated plates up to8 in. (20 cm) in diameter.1. To lower the upper rack by 2 in. (5 cm), pull theadjust handles located at the left and right sidesof the upper rack, and then push the upper rackdownwards slightly at the same time.2. To raise the upper rack, just pull the upper rackupwards. The adjuster handle will latch and theupper rack will move to the high position.We recommend adjusting the height of theupper rack before loading dishes into the rack. Ifyou adjust the the rack after loading the dishes,you may damage the dishes. If you do notadjust with left and right handle together, thedishwasher door may not close properly.Pull out the upper rack from the tub until it isfully revealed before adjusting the upper rack.Using the glass supportYou can load cups or glasses onto the glass support. This is also veryconvenient for washing wine glasses. Hang your wine glasses onto thepegs of the glass support.You can fold the glass support back when it is not being used.REMOVING THE UPPER RACK (FOR SOME MODELS)You can remove the upper rack to accommodate extra large items in the bottom rack. Take care thatyou do not lose the holder rails during this process.To remove the upper rack from the slide rail, pull the upper rack out from the tub until it is fully extended.Hold down the holder rails on both sides to release the upper rack. Slide the upper rack out to the end ofone holder rail, and then lift it up.Repeat the steps above with the other holder rail.Step 1. Step 2. Step 3.CAUTIONusing your dishwasherUntitled-1 16Untitled-1 16 2015-04-08 8:08:282015-04-08 8:08:28