Samsung DVDVR300 Quick Setup Manual

Also see for DVD-VR300: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Step Getting ConnectedStep SetupStep Basic OperationQuick Setup GuideStepStep Getting ConnectedSelect one of the following three types of connections:Antenna + DVD Recorder-VCR + TV : No Cable BoxAntenna + Set-Top Box + DVD Recorder-VCR + TV : No Cable BoxAntenna + Cable Box + DVD Recorder-VCR + TVAntenna + DVD Recorder-VCR + TV : No Cable BoxOUTRF(TO TV)DIGITAL AUDIO OUTAUDIO OUTCOMPONENTVIDEO OUTOPTICAL COAXIALR YCB/PBCR/PRLRAUDIO AUDIOLINE OUT LINE IN 1VIDEO VIDEOLRLIN(FROM ANT.)OUTRF(TO TV)RLRLTVDVD Recorder-VCRConnect the signal source to the DVDRecorder-VCRUse an antenna cable to connect the signal source com-ing from the antenna or wall to the VHF/UHF RF-IN jackon the DVD Recorder-VCR.Connect the DVD Recorder-VCR to the TVUse the supplied RF cable to connect RF-OUT on theDVD Recorder-VCR to the ANT jack on the TV. Then usethe Video/Audio Cable to connect ANALOG AUDIOOUT(R/L)/VIDEO OUT jacks on the DVD Recorder-VCR tothe Audio & Video jacks on the TV. If your TV has an S-Video jack, you can use S-Videocable instead of the yellow video connector on theVideo/Audio cable. If your TV has Component video jacks, you can usecomponent cables instead of the yellow video con-nector on the Video/Audio cable. Press theProgressive out button on the front of your DVDRecorder-VCR to 480p/480i video output mode. Ifyour TV supports progressive scan, select 480p.If you have an AV amplifierConnect either audio cables from the ANALOG AUDIOOUT jacks on the DVD Recorder-VCR to the LINE IN jackson your AV amplifier, or a digital cable from the DIGITALAUDIO OUT (COAXIAL or OPTICAL) jack on the DVDRecorder-VCR to the DIGITAL AUDIO IN jack on your AVamplifier.1The Recorder will only record onDVD-R, DVD-RW and DVD-RAM discs.C Samsung Electronics Printed in Korea