Samsung DVD-K120 Instruction Manual

12CONNECTIONS• When playing a DTS disc, no sound is produced. In such case, use an amplifier equipped witha DTS decoder.• When playing back a 5.1 channel encoded DVD, sound is output from the center and rearspeakers only.• When playing back a 2 channel encoded DVD, CD, tape, or tuner, no sound is output fromthe center and rear speakers.• Please turn the volume down when you turn on the Amplifier.Sudden loud sound may cause damage to the speakers and your ears.• The position of terminals may vary depending on the Amplifier.Please refer to the user's manual of the Amplifier.NoteConnecting to an amplifier with Dolby Pro Logic support.Connection for better soundIf using an optical cable (not included), connect the DIGITAL AUDIO OUT(OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN(OPTICAL) terminal of the Amplifier.Dolby digital orDTS ampOptical Cable(not included)What is Dolby Pro Logic?Using five speakers, it recreates the origi-nal sound of the music or audio and pro-vides the sense of presence, as if youwere in a movie theater or concert hall.(Model : DVD-K130/K250)(Model : DVD-K120)Dolby digital orDTS ampOptical Cable(not included)11Connecting the Audio Out to AmplifierConnection to an Audio System (2 Channel Amplifier)Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rearof the DVD player to the AUDIO (red and white) IN terminals of the Amplifier.Connection to a 5.1CH Analog AmplifierIf using audio cables for 5.1 CH Analog Amplifier (not included) connect the 5.1CHANALOG AUDIO OUT terminals on the rear of the DVD player to the 5.1CH ANALOGAUDIO IN terminals of the 5.1CH Analog Amplifier.2-Channel stereo amp5.1ch AnalogAmplifierRED WHITEAudio Cable2-Channel stereo ampRED WHITEAudio Cable(Model : DVD-K120) (Model : DVD-K130/K250)(Model : DVD-K130/K250)