Samsung DVD-K115 Instruction Manual

10CONNECTIONSonnection of the TV monitor Connection for better soundThe following show examples of connections commonly used to connect theDVD player with a External Source.Connecting to an amplifier with Dolby Pro Logic support.TV monitorWhat is Dolby Pro Logic?Using five speakers, it recreates the original sound ofthe music or audio and provides the sense of pres-ence, as if you were in a movie theater or concert hall.AMPLIFIER• When playing a DTS disc, no sound is produced. In such case, use an amplifier equipped with a DTSdecoder.• When playing back a 5.1 channel encoded DVD, sound is output from the center and rear speakers only.• When playing back a 2 channel encoded DVD, CD, tape, or tuner, no sound is output from the center andrear speakers.NoteETHOD 2 Scart ............... Better Qualityf you television is equipped with an SCART input, connect an Scart Jack (not supplied) from theV OUT jack on the back panel of the system to the SCART IN jack on your television.ETHOD 1 Composite Video ............... Good Qualityonnect the supplied video cable from the VIDEO OUT jack on the back panel of the sys-em to the VIDEO IN jack on your television.VIDEO SELECT FunctionPress and hold VIDEO SEL. button on the remote control for over 5 seconds.• "COMPOSITE" or "RGB" will appear in the display.At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".• If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.You can get a better picture quality by using Scart setting.• If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE mode.105-115 2006.8.8 8:37 AM Page 12