Samsung DVD-K100 Instruction Manual

Disc Playback• Depending on the content of the disc, the initial screen mayappear different.• To resume playback, press PLAY/PAUSE ( )button again.1 Press OPEN/CLOSE button toopen the disc tray.2 Load a disc.3 Press OPEN/CLOSE buttonto close the disc tray.To temporarily pause playback,press PLAY/PAUSE during playback.DVD VCD CD• Playback starts automatically.• Place a disc gently into the tray with thedisc’s label facing up.• If pressed once, “PRESS PLAY” is displayed and thestop position will be stored in memory. If PLAY/PAUSE( ) button or ENTER button is pressed, playbackresumes from the stop position. (This function worksonly with DVDs.)• If pressed twice, “STOP” is displayed, and ifPLAY/PAUSE ( ) button is pressed, playbackstarts from the beginning.To stop playback,press STOP during playback.Note11• In this manual, the instructions marked with "DVD ( )" are applicable toDVD-VIDEO and DVD-R/RW discs.Where a particular DVD type is mentioned, it is indicated separately.• Depending on the content of the disc, the initial screen may appear different.DVDNoteTitles and chapters (DVD-VIDEO)• DVD-videos is divided into several large sections called "titles" and smallersections called "chapters". Numbers are allotted to these sections.These numbers are called "title numbers" and "chapter numbers".TITLE 1 TITLE 2CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2CHAPTER 3Tracks (Video and music CDs)• Video and music CDs are divided into sections called "tracks".Numbers are allotted to these sections. These numbers are called "track numbers".TRACK 1 TRACK 2 TRACK 4 TRACK 5TRACK 3Disc terminology12OPERATION