Samsung DVD-H40A User Manual

Also see for DVD-H40A: User manual User manual

Connecting DHR(DVD HDD Recorder) to the TV using the Coaxial Cable19Deciding How to Connect DHR(DVD HDD Recorder)18You must take into account various factors when connecting audio or video systems: Types of connectors available on your systems Systems connected permanently to the DHR (satellite receiver for example) or temporarily(camcorder for example)Your DHR is equipped with the following connectors.Connector Location Type Direction Recommended UseLINE Rear/Front Audio/Video RCA In/Out Television Other VCR/DVD Satellite receiverAUDIO input Rear Audio RCA In Audio In for S-VIDEOCOMPONENT Rear RCA Out COMPONENT outoutputS-VIDEO Rear S-JACK In/Out S-Video in/outinput/outputDigital AUDIO Rear Optical Out Digital Audio outoutput coaxialOUT TO TV Rear 75 Ω Out TelevisionCoaxialIN FROM ANT. Rear 75 Ω In AerialCoaxial Cable television network Satellite receiver☛ Whenever you connect an audio or video system to your DHR,ensure that all elements are switched off.Refer to the documentation supplied with your equipment for detailedconnection instructions and associated safety precautions.Connecting DHR(DVD HDD Recorder) to the TV using the RCA CableTo receive television programs a signal must be received from oneof the following sources: An outdoor aerial An indoor aerial A cable television network A satellite receiver➢ Make sure that both the television and the DHR areswitched off before connecting the cables.1 Remove the aerial or network input cable from the television.2 Connect this cable to the 75Ω coaxial socket marked IN (PROMANT.) on the rear of your DHR.3 Plug the coaxial cable supplied into the socket marked OUT (TO TV)on your DHR.4 Plug the other end of the coaxial cable into the connectorpreviously used for the aerial on the television.5 To obtain better quality pictures and sound on your television, youcan also connect your DHR to the television via the RCA cable(see section below) if your television is equipped with this type ofconnection.You can connect your DHR to the television using the RCA cable if the appropriate input is available onthe television. You thus: Obtain better quality sound and pictures Simplify the setting up procedure of your DHR➢ Regardless of the type of connection chosen, you must always connect the coaxial cablesupplied. Otherwise, no picture will be visible on the screen when the DHR is switched off. Make sure that both the television and the DHR are switched off before connecting the cables.1 Connect the coaxial cable as indicated in the above section.2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rearof the DHR.3 Plug the other end into the appropriate connector on the television.34AerialRF coaxial cable3TVTV22