EnglishInstallationEnglish18STEP 3 Connect the drain hose• We strongly recommend connecting the drain hoseto your drainage system.• If the drain hose connected on the dryer is tooshort to reach the drainage system, use theprovided accessory hose (long drain hose).• Use the built-in water tank only if you cannotconnect the drain hose to a drainage system.NOTEAs a factory default, this dryer is set to use the built-inwater tank to drain condensed water.AB1. Remove the drain hose from hole (A), and insert itinto part (B).A2. Insert one end of the accessory hose (long drainhose) into hole (A).3. Insert the other end (outlet) of the accessory hoseto the drainage system in one of the followingways:Untitled-2 18 8/11/2020 3:35:41 PM