EnglishEnglish 19Over a wash basin:ACB1. Make sure to place the end of the accessory hoselower than 90 cm (*) from the bottom of dryer.2. To bend some point of the accessory hose, usethe supplied plastic hose guide (B) and secure theguide to the wall with a hook or to the tap with apiece of string. Assemble the drain hose (A) andthe hose guide (B) and fix them with the cable-tie(C).3. You can drain the condensed water by connectingthe accessory hose (long drain hose) to the drain-outlet directly.CAUTIONDo not extend the drain hose. Water may leak fromthe connected area. Use a long drain hose.By using the drain pipe of the wash basin:A1. Assemble the hose connector (A), and attach it tothe end of the accessory hose as shown.CAUTIONTo prevent water leak, make sure to connect the hoseand the connector firmly.2. Connect the hose adapter directly to the drain pipeof the wash basin.Untitled-2 19 8/11/2020 3:35:43 PM