70Before contacting a service centerPlease check the followingSymptom Causes Remedy- Insert fresh batteries- Connect an AC Power Adapter- There is low battery capacity- An AC Power Adapter is not connected- The batteries are exhausted- The Camera is turned off automatically.- The Adapter plug is not connected securely- The Camera is being used in lowtemperatures- Mixing old and new batteries or batterytypes- There is insufficient memory capacity- The memory card has not been formatted- The memory card is exhausted- The camera’s power is off- The batteries are exhausted- The memory card is lockedThe cameradoesn’t switch onThe camerapower ceaseswhilst in useBatteries drainquicklyCamera doesnot takeimages whenpressing theShutter button- Insert fresh batteries- Slide the power switch to reactivate camera- Remove and re-insert the plug- Keep the camera in warm conditions (i.e.inside a coat or jacket) and only remove itin order to take images- Insert fresh batteries (all of which shouldbe of the same type)- After turning the camera off, insert a newmemory card or delete unnecessary image files.- Format the memory card.- Insert a new memory card- Turn the camera power on- Insert fresh batteries- Slide the write protect switch to the top ofthe memory card- An Incorrect focus mode is selected.The imagesare unclear- Select a correct focus mode related tothe distance- FLASH OFF mode has been selected.The flash doesnot fire - Disengage FLASH OFF mode- The date and time have been setincorrectly.Incorrect dateand time isdisplayed- Reset the date and time correctly. (p.61)