Samsung DCS Keyset User Guide– 54 –5. Press the DIR key or the DIAL soft key to dial the number.Display Number DialledDisplay keysets show digits as they are dialled. They will stay in thedisplay until the call duration timer comes on automatically or theTIMER key is pressed (see below). If the call duration timer is notused, the number dialled is displayed until the call is released, trans-ferred or put on hold.Call Duration TimerThe system can be set to time outside calls automatically. A few sec-onds after you dial a telephone number, the timer will appear in thedisplay. (It appears immediately for incoming calls.) See Auto Timer,below.To manually begin timing a call, you can use the Timer function. SeeTimer Function, belowAuto TimerYou can have the timer automatically start when you answer incom-ing calls, or after a short delay on an outgoing call.1. While on-hook, press the TRSF key and dial 110.2. Dial 11 to turn the auto timer on or 10 to turn it off.3. Press the TRSF key to store your selection.The call timer displays in minutes and seconds for the duration of thecall. If a call lasts longer than 99 minutes, the timer restarts.Timer FunctionYou can manually time your calls or use this feature as a simple stop-watch.
