Samsung DCS-816 Installation Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual General description

Contents

SAMSUNG InstallationDCS-816 March 19996-46.4 Door Phone and Door Lock Release (Figure 6-3)The DCS DPIM module is required to install a door phone or a door lock release. The DPIM has adoor phone interface and a door lock release circuit, which can be connected to any DLI port ofDCS-816. The system requires MDF connection for DPIM modules and modular jack connectionfor a door phone or a door lock release. DPIM connections can be done through the champconnector on the base board. See Figure 2-3 and refer to section 2.5 (MDF Cabling).Use one pair twisted wires, connect each DPIM module to the DLI port of your choice via thechamp connector on the base board and connect a door phone or a door lock release to theDPIM.CONNECTING A DOOR PHONE AND LOCK RELEASE25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTORFIGURE 6-3CHAMP CONNECTIONPIN COLOUR CIRCUITS / FUNCTIONS39/14 BK-BR/ BR/BK T/R, 1st DLI port on base40/15 BK-S/ S-BK T/R, 2nd DLI port on base41/16 Y-BL/ BL-Y T/R, 3rd DLI port on base42/17 Y-O/ O-Y T/R, 4th DLI port on base43/18 Y-GR/ GR-Y T/R, 5th DLI port on base44/19 Y-BR/ BR-Y T/R, 6th DLI port on base45/20 Y-S/ S-Y T/R, 7th DLI port on base46/21 VL-BL/BL-VL T/R, 8th DLI port on base47/22 VL-O/ O-VL T/R, 9th DLI port on base48/23 VL-GR/ GR-VL T/R, 10th DLI port on base49/24 VL-BR/ BR-VL T/R, 11th DLI port on base50/25 VL-S/ S-VL T/R, 12th DLI port on base≤ CONNECT A DPIM TO ANY DLI PORT AFTERCONNECTING A DOOR PHONE TO THE DPIM≤ NO EQUIPMENT CAN BE INSTALLEDOUTDOORS≤ DOOR LOCK RELEASE RATE : 24VDC, 1A MAXLOCK DOOR BOX LINE£–£´£–£≠£Ã£±£Ã£≤DOOR PHONEREDBLACKGREENYELLOWTWO PAIRMODU LAR CABLEWHITEBLUETHREE PAIRMODULAR CABLETO CUSTOMER-PROVIDEDDOOR LOCK RELEASE1645323 4Technical Manuals Online! - http://www.tech-man.com