159Preset Timing Modes― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other thanthe specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.― Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the verticalfrequency to 60Hz using the CDT product before you exchange it with the LCD product.Synchronization Horizontal Frequency 30 - 81 kHzVertical Frequency 48 - 75 HzResolution Optimum resolution 1280 x 800 @ 60 HzMaximum resolution 1920 x 1080 @ 60 HzMaximum Pixel Clock 148.5 MHz (Analogue, Digital)The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PCdoes not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table byreferring to the graphics card user manual.- Horizontal FrequencyThe time required to scan a single linefrom the left to the right side of thescreen is called a horizontal cycle. Thereciprocal number of a horizontal cycleis called horizontal frequency. Horizontalfrequency is measured in kHz.- Vertical FrequencyThe product displays a single imagemultiple times per second (like afluorescent light) to display what theviewer sees. The rate of a single imagebeing displayed repeatedly per second iscalled vertical frequency or refresh rate.Vertical frequency is measured in Hz.
