Samsung CY-SWC1000A User Manual

English-2to the user manual of the product.y Be sure to use the adapter supplied with the glasses. Using an adapter that is notsupported may damage the glasses or cause the glasses to malfunction.5. Safety PrecautionsThe following is to prevent injury to users and damage to property. Make sure to carefully readand observe the following.[ Warning● Do not use the product for a purpose other than charging the devices specified in this user manual.Do not throw the product or use the product as a pillow or a stand for another object.● This product artificially generates a magnetic field in charge ready mode. Although this productdoes not affect general electric appliances, do not place the product near electronic equipmentsensitive to magnetic fields, especially life sustaining equipment.● Do not place the product in a location exposed to direct sunlight, heat or moisture. This may resultin a malfunction or fire.● Do not apply pressure or impact or drop this product. This may result in a malfunction.● Do not spray water or cleaning agent directly onto the product. Failing to do so may cause a fire orelectric shock, damage the appearance or erase the print on the product.● Do not apply chemicals containing alcohol, solvent or surfactant such as wax, benzene, thinner,mosquito repellent, air freshener, lubricant or cleaning agent to the product. This may result in theexterior becoming discolored or cracked, or the print may be erased.Ferrite Coreyy Ferrite Core for Power Cord: The ferrite cores are usedto shield the cables from interference. When connectingthe ferrite core to a cable, open the ferrite core and clipit around the cable near the plug as shown in the figure.yy A One ferrite core should be no more than 4 inchesfrom the end of the cord that is inserted into the ACoutlet.6. TroubleshootingIf this symptom appears take the following countermeasure.The charging functiondoes not work.Check if the top power LED is green and the blue front LEDblinks slowly.The top power LED orthe front blue LED is notilluminated.Check if the AC adapter is connected properly and the DCpower jack is connected properly.The top LED blinks at aregular interval.The charger temporarily entered overload protection mode.Remove the 3D glasses from the wireless battery charger.Next, disconnect and re-connect the DC jack.7. Product Specifications (Model: CY-SWC1000A)Operating Type Energy transfer through 13.56MHz magnetic resonance.Dimensions (D x H) 188 x 115 mm (7.4 x 4.5 in )Weight Approximately 524 gPower SupplyAC Adapter Input AC 100~240V 50/60HzCradle Input DC 12VPower ConsumptionStandby Mode 0.5WCharging Mode 8.9WOperating ConditionsOperating Temperature 10°C ~ 40°C (50°F ~ 104°F)Operating Humidity 10% ~ 80%, non-condensingStorage Temperature -20°C ~ 45°C (-4°F ~ 113°F)Storage Humidity 5% ~ 95%, non-condensingCharge Time 3D glasses 2~3 Hours (charging individually)※ The charging time mentioned above is based on the glasses being placed within therecommended area of use as indicated herein. Charging may take longer if the glassesare outside of the recommended area.CY-SWC1000A_Na_L16.indb 2 2011-02-17 오후 1:19:07