Samsung CT-21K40ML Owner's Instructions Manual

Contents

English - 1Control Panel (depending on the model)➢ The product colour and shape may vary depending on themodel. You can use the 3 buttons to switch the TV on when it isin standby mode depending on the model. The 2 and 3 buttons also have the same function as the◄/►/▲/▼ buttons on the remote control. If the remote control no longer works or you havemisplaced it, you can use the controls on the panel of thetelevision.COLOUR TELEVISIONAA68-03905G-01Owner’s InstructionsBefore operating, please read this manual thoroughly,and retain it for future reference.Register your product at www.samsung.com/global/register.Record your Model and Serial number.▪ Model __________ ▪ Serial No. __________CT-21Z40ML / CT-21Z45MLCT-21M40ML / CT-21K40ML➢ Please be sure to match the color coded input terminalsand cable jacks.When both the side and rear jacks (AV IN) are connectedto external equipment, the side receives priority.1 Audio Input JacksConnect audio signals from a camcorder or video game.2 Video Input JackConnect a video signal from a camcorder or video game.3 Headphone JackConnect a set of external headphones to this jack for privatelistening.Side Jack1 Audio input2 Video input3 Headphone jack1 On-screen menu display2 Volume adjustment3 Channel selection4 Remote control sensor5 Standby indicator6 Power on/offFront (or Side) PanelAA68-03905G-01_Eng.indd 1 2007-03-14 ｿﾀﾈﾄ 4:01:52Connection Panel (depending on the model)➢ The product colour and shape may vary depending on themodel.☛ Whenever you connect an audio or video system to yourtelevision, ensure that all elements are switched off.☛ Please be sure to match the colour coded input terminalsand cable jacks.Connecting to an Aerial or Cable Television NetworkConnect the aerial or network input cable to the 1 (75 Ωcoaxial socket).To view television channels correctly, a signal must bereceived by the set from one of the sources: an outdoor aerial,cable television network, or satellite network.If you are using an indoor aerial, you may need to adjust itwhen tuning your television until you obtain a picture that isboth sharp and clear.Connecting to the RCA OutputThe RCA2 connectors are used for equipment, such as arecording VCR or audio system.Connecting to the RCA InputThe RCA3 connectors are used for equipment, such as aVCR, DVD, decoder, satellite receiver, video game device, orvideo disc player. (When using the mono equipment, connectto the AUDIO-L input connector.)The RCA4 connectors are used for equipment such as aDVD with component output (480i only).Rear Panel