English - 1 AA68-03628A-00➢ The actual configuration of your TV may be different,depending on your model.Control Panel (depending on the model)◆ You can use the ¨ buttons to switch the TV on when it isin standby mode depending on the model.◆ The ˇ and ¨ buttons also have the same function as theœ/√/…/† buttons on the remote control.◆ If the remote control no longer works or you havemisplaced it, you can use the controls on the panel of thetelevision.Front (or Side) PanelŒ Input source selection´ On-screen menu displayˇ Volume adjustment¨ Channel selectionˆ Standby indicatorØ Remote control sensor∏ Power on/off➢ The actual configuration of your TV may be different,depending on your model.Connection Panel (depending on the model)cable television networkRear Panel☛ Whenever you connect an audio or video system to yourtelevision, ensure that all elements are switched off.Please be sure to match the color coded input terminalsand cable jacks.Connecting to an Aerial or Cable Television NetworkConnect the aerial or network input cable to the Œ (75 Ωcoaxial socket).To view television channels correctly, a signal must bereceived by the set from one of the sources: an outdooraerial, cable television network, or satellite network.If you are using an indoor aerial, you may need to adjust itwhen tuning your television until you obtain a picture that isboth sharp and clear.Connecting to the SCART Input/OutputThe SCART´ and SCARTˇ connectors are used forequipment, such as a VCR, DVD, decoder, satellite receiver,video game device, or video disc player.The SCART´ is also used for equipment with an RGBoutput, such as a video game device or video disc player.continued...orŒ Audio input´ Video inputˇ S-Video input¨ Headphone jackFront (or Side) Panel☛ Please be sure to match the color coded input terminalsand cable jacks.Connecting to the RCA InputThe Œ (AUDIO-L/R) and ´ (VIDEO) connectors are usedfor equipment, such as a camcorder, video disc player, orvideo game device.Connecting to the S-VIDEO InputThe ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are usedfor equipment with an S-Video output, such as a camcorderor VCR.Connecting HeadphonesThe ¨ (headphone) jack is used for watching a televisionprogramme without disturbing the other people in the room.Prolonged use of headphones at a high volume may damageyour hearing.➢ When both the front (or side) AV and rear connectorsare connected to external equipment, the front (orside) AV receives priority.COLOR TELEVISIONCS21A11/CS21M7/CS21M20/CS21S8/CS21T10/CS21T20/CS25A6/CS25A11/CS25K10/CS25M6/CS25M20/CS29A7/CS29A11/CS29K3/CS29K5/CS29K10/CS29M6/CS29M16/CS29M20Owner’s InstructionsBefore operating, please read this manual thoroughly,and retain it for future reference.Register your product atwww.samsung.com/global/registerConnecting to the RCA InputThe RCA¨ and RCAˆ connectors are used for equipment,such as a VCR, DVD, decoder, satellite receiver, video gamedevice, or video disc player. (When using the monoequipment, connect to the AUDIO-L input connector.)The RCA∏ connectors are used for equipment such as aDVD with component output (480i only).Connecting to the RCA OutputThe RCAØ connectors are used for equipment, such as arecording VCR or audio system.AA68-03628A-X1Eng_0413 4/13/05 9:22 PM Page 1All manuals and user guides at all-guides.comall-guides.com