Samsung COLOR TELEVISION Owner's Instructions Manual

Contents

English - 4This function is very useful in thesituation that the TV is used inweak signal. LNA amplifies theTV signal in the weak signalarea, but not noise. LNA (Low Noise Amplifier) setting is to be made foreach channel. If the picture is noisy with the LNA set to On, select Off. Depending on areas, factory mode of LNA will be set upas On or Off.Channel - LNAMove Enter ReturnAuto Store √√Manual Store √√Add/Delete √√Sort √√LNA : √√ChannelTVYou can exclude channels youhave chosen from the channelsyou scanned. When you scanthrough the stored channels,those you have chosen to skipare not displayed. All of thechannels that you did notspecifically choose to skip are displayed during scanning.Select Added or Deleted by pressing the ENTER buttonrepeatedly.Channel - Add/DeleteThis operation allows you tochange the programme numbersof stored channels. Thisoperation may be necessaryafter using auto store. From: Channel number tobe changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers.Channel - SortMove Enter ReturnP 1 : AddedP 2 : AddedP 3 : AddedP 4 : AddedP 5 : AddedAdd/DeleteTVMove Adjust ReturnFrom : P 1To : P--Store : ?SortTVChannel - Manual StoreYou can store channels,including those received viacable networks. When storingchannels manually, you canchoose:- Whether or not to store eachof the channels found- The programme number of each stored channel whichyou wish to identify Programme (Programme number to be assigned to achannel) Color System: AUTO/PAL/SECAM/NT4.43/NT3.58 Sound System: BG/DK/I/M Search (When you do not know the channel numbers):The tuner scans the frequency range until the firstchannel or the channel that you selected is received onthe screen. Channel (When you know the number of the channel tobe stored)➢ You can also select the channel number directly bypressing the numeric buttons (0~9). Store (When you store the channel and associatedprogramme number)➢ If there is no sound or abnormal sound, re-select thesound standard required.☛ Channel mode P (Programme mode): When completing tuning, thebroadcasting stations in your area have beenassigned to position numbers from P00 to P99. Youcan select a channel by entering the position numberin this mode. C (Real channel mode): You can select a channel byentering the assigned number for each airbroadcasting station in this mode. S (Cable channel mode): You can select a channel byentering the assigned number for each cable channelin this mode.Move Adjust ReturnProgramme : P 3Color System : AUTO √√Sound System : BG √√Search : 46MHzChannel : C 1Store : ?Manual StoreTVYou can scan for the frequency ranges available to you (andavailability depends on your country). Automatically allocatedprogramme numbers may not correspond to actual ordesired programme numbers. However you can sortnumbers manually and clear any channels you do not wishto watch.Channels are sorted and storedin the order which reflects theirposition in the frequency range(with lowest first and highestlast). The programme originallyselected is then displayed.➢ To stop the search before ithas finished, press theMENU button.When finished, the Sort menuis displayed. To sort the storedchannels into the desirednumerical order, refer to “Channel - Sort”. To exit withoutsorting, press the EXIT button.Channel - Auto StoreSearchEnter ReturnStopP 1 C-- ----- 102MHz7 %Move Enter ReturnArea : Belgie √√Search √√Auto StoreTVASIA/W.EUROPECIS/E.EUROPECHINAHONGKONG/UKAUSTRALIANZL/INDONESIASOUTH AFRICAAMERICAOffOnAA68-03630A-02Eng_asia_n/p 11/16/05 11:47 AM Page 4