CHAPTER 4. Conference Features2.2.2. Dial Conference IDParticipant hears announcement which requests to dial conference ID.Participant should dial conference ID following examples below.• Conference ID (xxx) + End of Digit (‘#’)→ 4 digits (Simple way)→ User will join the conference as an Anonymous.• Conference ID (xxx) + Member Login Index (yy) + End of Digit (‘#’)→ 6 digits.→ Member Login Index can be 01 to 99. If user dials 99 as member loginindex, then that user will join the conference as a Master.3.3.3. Dial PasswordAfter confirming Conference ID, participant hears announcement whichrequests to dial password.Participant should dial conference ID following below examples.• Password (zzzz) + End of Digit (‘#’)→ 5 digitsSystem provides 3 times of retry opportunity when wrong conference IDor password is entered. In this case participant hears announcementfor retry. If all retries are failed, participant hears error announcementand the current procedure is ended.4.4.4. GreetingAfter confirming password, participant hears greeting announcement5.5.5. Record WhoamIParticipant hears announcement which requests to record their whoamiafter the beep tone.Recording will be stopped when participant dials ‘#’ key or max recordtimer (Max Rec Time) in DM 9.1.1 is expired.6.6.6. Play SPA (Single Participant Announcement)Only 1st member can hear SPA until the other participants join theconference.In this case 1st member does not join the conference untill the 2nd memberhas entered their password.7.7.7. Join AlarmCurrent members who have already joined the conference can hearjoin-alarm tone of a new participant.42 ⓒ SAMSUNG Electronics Co., Ltd.