Samsung CLX-FIN40S Service Manual

1. Specification1-10SAMSUNG ELECTRONICSService ManualCLX-FIN40S/CLX-FIN40L1.6 Mode Feature¾ Main Stack Mode : Must be able to receive faced-down images from the IOT and stack as much as3,000 sheets (A4/LT 80gsm) onto the main stacker tray. The Stacker tray must be able toaccommodate various types and sizes of sheets.¾ Offset Mode : Shifts the space between sets to 30mm in order to distinguish sets that have beenpost-processed during Main Stack Mode.¾ Top Stack Mode : The finisher must be able to assort and discharge papers to the top tray, andstack as much as 250 sheets(80gsm). Sheets that have been collected to the Top tray cannot accesspost-processing functions such as offset, stapling, punching, etc.¾ Staple Mode : When the user selects this mode, it staples designated corner of the papers that haveto compiled (more than 2 pages).. Corner staple(Front, Rear): Clinches at 45 degrees from the paper path.. Dual staple: Clinches at 90 degree from the paper path designated according to the type of paper¾ In case of simplex copy, the clincher leg must face the back side of the image. The stapler must beable to clinch as much as 50 sheets (90gsm).¾ Hole Punch : The punch module should accommodate NA2/3, EU2/4, or Scandinavia 4 holemodule(TBD) depending on the target market. There must be a waste hopper that collects wastesproduced during hole punching. The waste hopper must be big enough to allow at least 5,000punches before it becomes full.¾ Booklet Maker Mode : A Dual Stapling must be possible at V-folding line of the paper (that cancover 15 sheets, or a 216gsm cover + fourteen 80gsm sheets, etc) that goes through the Bookletmaker. The folding is positioned at the centerline of the paper path.

/ 148

Related manuals for Samsung CLX-FIN40L

Samsung SCX-FIN20S Service Manual

This manual is suitable for:

CLX-FIN40L CLX-FIN40S

Samsung CLX-FIN40S Service Manual

Product

Learn More

Legal