Samsung CD Player User Manual

Contents

a : Master Drive (Choose the MA Jumper) b : Slave Drive (Choose the SL Jumper)c : Hard Drive d : MainBoarde : Primary 1 f : Secondly 1Installing a jumper on the master/slave select terminalConnect a jumper to the rear side of the COMBO.If the jumper is connected to MA (Master), it will work in the Master mode.If the jumper is connected to SL (Slave), it will work in the Slave mode.If the jumper is connected to CS (CSEL), you can control the device by using the host interface signalCSEL. (In general, connection to MA is recommended.)Connecting the audio cable from a sound cardConnect the 4-pin audio cable between the sound output terminal on the COMBO drive and the audioinput terminal on the sound card.For clearer sound, use a digital output terminal.(Available only for the CAID that supports digital output)This may not be available for general sound cards.If there is two COMBO drive, select MA (Master) / SL (Slave).SetupEnglish - 11