Samsung CB15K10 Owner's Instructions Manual

Also see for CB15K10: Owner's instructions

English - 1➢ The actual configuration of your TV may be different,depending on your model.Connection Panel (depending on the model)cable televisionnetworkRear Panel☛ Whenever you connect an audio or video system to yourtelevision, ensure that all elements are switched off.Please be sure to match the color coded input terminalsand cable jacks.Connecting to an Aerial or Cable Television NetworkConnect the aerial or network input cable to the 1 (75 Ωcoaxial socket).To view television channels correctly, a signal must bereceived by the set from one of the sources: an outdooraerial, cable television network, or satellite network.If you are using an indoor aerial, you may need to adjust itwhen tuning your television until you obtain a picture that isboth sharp and clear.Connecting to the SCART Input/OutputThe SCART2 connector is used for equipment, such as aVCR, DVD, decoder, satellite receiver, video game device, orvideo disc player.continued...or☛ Please be sure to match the color coded input terminalsand cable jacks.Connecting to the RCA InputThe 1 (AUDIO-L/R) and 2 (VIDEO) connectors are usedfor equipment, such as a camcorder, video disc player, orvideo game device.Connecting HeadphonesThe 3 (headphone) jack is used for watching a televisionprogramme without disturbing the other people in the room.Prolonged use of headphones at a high volume may damageyour hearing.➢ When both the front (or side) AV and rear connectorsare connected to external equipment, the front (orside) AV receives priority.COLOR TELEVISIONOwner’s InstructionsBefore operating, please read this manual thoroughly,and retain it for future reference.Register your product atwww.samsung.com/global/register1 Audio input2 Video input2 Video input1 Audio input3 Headphone jack3 Headphone jackFront (or Side) PanelororConnecting to the RCA InputThe RCA4 connectors are used for equipment, such as aVCR, DVD, decoder, satellite receiver, video game device, orvideo disc player. (When using the mono equipment, connectto the AUDIO-L input connector.)Connecting to the RCA OutputThe RCA3 connectors are used for equipment, such as arecording VCR or audio system.➢ The actual configuration of your TV may be different,depending on your model.Control Panel (depending on the model)◆ You can use the 3 buttons to switch the TV on when it isin standby mode depending on the model.◆ The 2 and 3 buttons also have the same function as theœ/√/†/… buttons on the remote control.◆ If the remote control no longer works or you havemisplaced it, you can use the controls on the panel of thetelevision.Front (or Side) Panel1 On-screen menu display2 Volume adjustment3 Channel selection4 Remote control sensor5 Standby indicator6 Power on/offAA68-03721A-04AA68-03721A-04Eng_indonesia 5/3/06 11:20 AM Page 1All manuals and user guides at all-guides.comall-guides.com