Samsung BrilliantVIEW SEW-3041W/EX User Manual

English · 15Appendix06TroubleshootingProblem SolutionNo picture from acamera1. Check all connections to the camera. Make sure the adapter is plugged in.2. Make sure that the cameras and monitor are both ON.3. Make sure that the camera is in range of the monitor.4. Make sure the camera and monitor are paired.5. Adjust the monitor antenna to vertical position.The picture is or hasbecome choppyThe picture may become choppy when experiencing a lower frame rate(i.e. 10 frames per second vs. a higher 20 frames per second).1. Try moving the camera closer to the monitor.2. Remove obstructions between the monitor and camera.3. Adjust the monitor antenna to vertical position.No sounds (even withboth units turned on)1. Make sure that the power adapter is connected to the camera.2. The battery on the monitor may be dead, be sure to charge it using theadapter included.3. The monitor may be out of range of the camera; be sure to check if theRange LED in on continuously.Your BrilliantVIEWis emitting an highpitched noise/feedback.This sound is normal feedback which occurs if the monitor and camera are tooclose together. Move them further apart.n ` Low batteries will cause the supply current to become unstable and will affect the qualityof the video/audio. Please charge the battery fully for use for superior video.

/ 19

Related manuals for Samsung 4365208