Samsung BabyVIEW SEW-3036W User Manual

Also see for BabyVIEW SEW-3036W: User manual

Contents

English · 702 Getting StartedVoice activated (Vox)Select to monitor significant sound with reduced ambient noise.The screen goes off in “Vox” mode if there is no significant soundlouder than a certain level within 1 minute. Meanwhile, the monitorscreen turns on as soon as detecting sound around the camera. In“Vox” mode, you can set the sensitivity with [ ] in menu.• H(High) : Sets to higher sensitivity.• L(Low) : Sets to lower sensitivity.Sleep ModePress the [SLeeP] button to turn off the screen and save batterypower. Your monitor will continue to detect sound around thecamera. Press any button to turn the screen on again.out of rangeIf the camera and monitor are not paired or if the monitor is outsideof transmission range with the paired camera, the “out of range”message appears with warning beeps at regular intervals.Two-way talkPress the [TALK] button while talking to transfer audio to the camera.ZoomPress the [SEW-3036W] button on the monitor to zoom in on the currentscreen. Press the button again to zoom back out.Sound levelThe louder the sound around the camera, the more LEDs turn on.Portable monitoringSlide the belt clip upwards to use the integrated belt clip on themonitor. When not in use, please push the clip back to its originalposition.SEW-3036WSEW-3036WTALKSEW-3036WSEW-3036W- ON- VOX- OFFDC IN 6VSEW-3036W-ENGLISH.indd 7 2012-09-03 오전 11:35:11