Samsung BD-J5900 User Manual

Also see for BD-J5900: User manual User manual

13HdmI Color FormatLets you set the color space formatfor HDMI output to match thecapabilities of the connected device(TV, monitor, etc).HdmI deep ColorLets you output video from theHDMI OUT jack with Deep Color.Deep Color provides more accuratecolor reproduction with greater colordepth.progressive modeLets you improve picture quality whenviewing DVDs.Sound Settingsdigital OutputLets you select the digital audiooutput format that is suitable for yourTV or AV Receiver. For more details,please refer to the Digital OutputSelection table to the right.digital Output SelectionSetup pCm Bitstream(Unprocessed)Bitstream(Re-encodeddTS)Bitstream(Re-encodeddolby d)Connection HdmIReceiver Coaxial HdmIReceiver CoaxialHdmIReceiver orCoaxialHdmI supportedAV receiver orCoaxialAudioStream onBlu-rayDiscPCM Up to7.1ch PCM 2ch PCM PCM 2ch Re-encodedDTSRe-encodedDolby Digital *DolbyDigital PCM 2ch PCM 2ch DolbyDigitalDolbyDigitalRe-encodedDTSRe-encodedDolby Digital *DolbyDigital Plus PCM 2ch PCM 2ch DolbyDigital PlusDolbyDigitalRe-encodedDTSRe-encodedDolby Digital *DolbyTrueHD PCM 2ch PCM 2ch DolbyTrueHDDolbyDigitalRe-encodedDTSRe-encodedDolby Digital *DTS PCM 2ch PCM 2ch DTS DTS Re-encodedDTSRe-encodedDolby Digital *DTS-HD HighResolutionAudioPCM 2ch PCM 2chDTS-HD HighResolutionAudioDTS Re-encodedDTSRe-encodedDolby Digital *DTS-HDMasterAudioPCM 2ch PCM 2chDTS-HDMasterAudioDTS Re-encodedDTSRe-encodedDolby Digital *AudioStream onDVDPCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2chDolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby DigitalDTS PCM 2ch PCM 2ch DTS DTS DTS DTSDefinitionforBlu-rayDiscAnyDecodes mainfeature audio andBONUSVIEW audiostream togetherinto PCM audio andadds NavigationSound Effects.Outputs only mainfeature audio streamso that your AVreceiver can decodethe audio bitstream.You will not hearBONUSVIEW audioand NavigationSound Effects.Decodes mainfeature audioand BONUSVIEWaudio streamtogether into PCMaudio and addsNavigation SoundEffects, then re-encodes the PCMaudio into DTSbitstreamDecodes mainfeature audioand BONUSVIEWaudio streamtogether into PCMaudio and addsNavigation SoundEffects, then re-encodes the PCMaudio into DolbyDigital bitstreamIf Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.*NOTES✎ If the TV you connected to the player■does not support Movie Frame orthe resolution you selected, themessage "If no pictures are shownafter selecting ‘Yes’, please wait for15 seconds to return to the previousresolution." appears. If you selectyes, the TV’s screen will go blank for15 seconds, and then the resolutionwill revert to the previous resolutionautomatically.If the screen stays blank after you■have changed the resolution, removeall discs, and then press and hold the^ button on the front of the playerfor more than 5 seconds. All settingsare restored to the factory default.Access the Resolution function andreset the output resolution to aresolution that is compatible withyour TV.When the factory default settings■are restored, all stored user BD datais deleted.The Blu-ray Disc must have the 24■frame feature for the player to usethe Movie Frame (24Fs) mode.movie Frame (24Fs)Setting the Movie Frame (24Fs) featureto Auto allows you to adjust theplayer’s HDMI output to 24 frames persecond for improved picture quality.You can enjoy the Movie Frame (24Fs)feature only on a TV supporting thisframe rate. You can select MovieFrame only when the player is in theHDMI 1080p output resolution mode.