Samsung BD-J5100 User Manual

Also see for BD-J5100: User manual

Contents

11If you have connected a LAN cable to5.the Blu-ray player, the Blu-ray playerautomatically verifies your wired network.a Previous d Skip ?\ Move " SelectInitial Settings I Network - WiredAuto ManualChoose the method to configure Internet Protocol (IP). Please makesure that the Ethernet cable is connected.Auto : Configure IP automaticallyNOTE✎ If you have no network, select Skip■by pressing the BLUE (d) button,and then go to Step 7.After the player verifies the network,6.press the v button.The Initial Settings Complete window7.appears and remains on the screen for a fewmoments. Then, the Home screen appears.NOTES✎ The Home screen will not appear if■you do not configure the player'ssettings during Setup, except asnoted below.If you press the■ BLUE (d) buttonduring network setup, you canaccess the Home screen even if thenetwork setup is not completed yet.If you do not complete network set■up during the Initial Setup, you cando it later. See page 13.When you return to the Home■screen, the full screen mode iscancelled automatically.If you want to display the Setup■screen again to make changes, pressthe ^ button on the front panel ofthe player for more than 5 secondswith no disc inserted. This resets theplayer to its default settings.After the Setup process is complete, you■can operate the HDMI-CEC function.If you want to use an Anynet+■(HDMI-CEC) function to aid in theinitial set up process, please followthe instructions below.1) Connect the player to anAnynet+(HDMI-CEC) compliantSamsung TV using an HDMI Cable.2) Set the Anynet+(HDMI-CEC) featureto On in both the TV and the player.3) Set the TV to the Setup Procedure.If you leave the player in the stop■mode for more than 5 minuteswithout using it, a screen saver willappear on your TV. If the player isleft in the screen saver mode formore than 25 minutes, the powerwill automatically turn off.Menu NavigationSCREENVIEW A-BFULLBONUS REPEAT REPEAT12 431 HOmE Button : Press to move tothe Home menu.2 RETURN Button : Return to theprevious menu.3v (Enter) / dIRECTION Button :Move the cursor or select an item.Activate the currently selected item.Confirm a setting.4 ExIT Button : Press to exit thecurrent menu.Home menu●App 1 App 2 App 3 App 4 App 5 more Change device SettingspLAy dISC pHOTOS VIdEOS mUSICNo Disc236571481 Access and play VIDEOS.2 Access and play MUSIC.3 Access and change SETTINGS.4 Change the Source Device.5 Access and view PHOTOS.6 Play a DISC.7 Access and use APPLICATIONS.8 Access MORE APPLICATIONS.NOTE✎ The Videos, Photos, and Music■options require that you have anappropriate disc in the player or a USBflash device attached to the player.Accessing the Settings MenuTo access the Settings menu and sub-menus, follow these steps:Press the1. POWER button.The Home Menu appears.Press the ▲▼◀▶ buttons to2.select Settings, and then press thev button.Press the ▲▼ buttons to select3.the desired submenu, and thenpress the v button.Press the ▲▼ buttons to select4.the desired item, and then pressthe v button.Press the5. EXIT button to exit themenu.NOTES✎ The access steps may differ depending■on the menu you selected. The OSD(On Screen Display) may change inthis player after you upgrade thesoftware version.Picture SettingsYou can configure various displayoptions such as the TV Aspect Ratio,Resolution, etc.TV Aspect RatioDepending on the type of televisionyou have, you may want to adjust thescreen size setting.NOTES✎ Depending on the disc type, some■aspect ratios may not be available.If you select an aspect ratio and■option which is different than theaspect ratio of your TV screen, thepicture might appear to be distorted.