Samsung BD-H5900 User Manual

Also see for BDH5900: User manual User manual User manual

Contents

Change pINChange the 4-digit password used to accesssecurity functions.To change the PIN, follow these steps:1. Select Change pIN, and then press thev button. The Enter old PIN screenappears.2. Enter the old PIN. If you never changedthe PIN, enter the default PIN: 0000.The Enter new PIN screen appears.3. Enter the new PIN in the Enter new PINfields.4. Re-enter the new PIN in the Confirmnew PIN fields. The "PIN is changedsuccessfully." message appears.5. Press the v button.If you forget your password1. Remove any discs.2. Press and hold the @ button on the frontpanel for 5 seconds or more.All settings will revert to the factory settings.✎ NOTES` When the factory default settings are restored,all the user stored BD data will be deleted.General SettingsTime ZoneLets you specify the time zone that isapplicable to your area.Support SettingsSoftware UpgradeThe Software Upgrade menu allows you toupgrade the player’s software for performanceimprovements or additional services.By OnlineTo upgrade By Online, follow these steps:1. In the player’s menu, go to Settings >Support > Software Upgrade2. Select By Online, and then press thev button. The Connecting to Servermessage appears.3. A popup message will appear if an updateis available.4. If you select yes, download processstarted. (Never turn the player on or offmanually during an upgrade.)5. When the update is completed, the playerwill restart automatically.✎ NOTES` The upgrade is complete when the player turnsoff, and then turns on again by itself.` Never turn the player off or back on manuallyduring the update process.` Samsung Electronics takes no legalresponsibility for player malfunction caused byan unstable Internet connection or consumernegligence during a software upgrade.` No disc should be in the product when youupgrade the software By Online.By USBTo upgrade by USB, follow these steps:1. Visit www.samsung.com/bluraysupport.2. Download the latest USB softwareupgrade zip archive to your computer.3. Unzip the zip archive to your computer.You should have a single RUF file with thesame name as the zip file.4. Copy the RUF file to a USB flash drive.5. Make sure there is no disc in the player,and then insert the USB flash drive intothe USB port of the player.6. In the player’s menu, go to Settings >Support > Software Upgrade.7. Select By USB.✎ NOTES` No disc should be in the product when youupgrade the software using the USB Host jack.` When the software upgrade is done, check thesoftware details in the software Upgrade menu.` Do not turn off the player during the softwareupgrade. It may cause the player to malfunction.` Software upgrades using the USB Host jackmust be performed with a USB flash memorystick only.Auto Upgrade NotificationIf you have connected the player to yournetwork, and then set Auto UpgradeNotification on, the player automaticallynotifies you when a new software version isavailable for the player.To set Auto Upgrade Notification on, followthese steps:1. Select Auto Upgrade Notification, andthen press the v button.2. Use the ▲▼ buttons to select On, andthen press the v button.If there is a new software version available,the player notifies you with a popup message.1. To upgrade the firmware, select yes in thePop-up. The player turns off automatically,then restarts, and begins the download.(Never turn the player on or off manuallyduring an upgrade.)2. The update progress popup appears.3. When the update is completed, the playerwill restart automatically.✎ NOTES` The upgrade is complete when the player turnsoff, and then turns on again by itself.` Never turn the player off or on manually duringthe update process.` Samsung Electronics takes no legalresponsibility for player malfunction caused byan unstable Internet connection or consumernegligence during software upgrade.Contact SamsungProvides contact information for assistancewith your player.Terms of Service AgreementLets you view the general disclaimer regardingthird party contents and services.ResetReturns all settings to their factory defaultsexcept for the network settings.17