Samsung BD-F6500 User Manual

Also see for BD-F6500: User manual User manual User manual

04 SettingsWi-Fi directThe Wi-Fi Direct function allows you to connectWi-Fi Direct devices to the player and each otherusing a peer-to-peer network, without a wirelessrouter.| NOTES |\ Some Wi-Fi Direct devices may not support the AllSharefunction if connected via Wi-Fi Direct. If this is the case,it is advisable to change the network connection methodbetween devices.\ Bluetooth transmissions can interfere with the Wi-FiDirect signal. Before you use the Wi-Fi Direct function,we strongly recommend that you turn off the Bluetoothfunction of any active mobile device.1. Turn on the Wi-Fi direct device and activateits Wi-Fi Direct function.2. In the Home screen, select Settings, andthen press the v button.3. Select Network, and then press the vbutton.4. Select Wi-Fi direct, and then press the vbutton.The Wi-Fi Direct devices that you canconnect appear.5. You have three ways to complete the Wi-Ficonnection:• Through the Wi-Fi device.• Through the player using PBC.• Through the player using a PIN.Each is covered below.Through the Wi-Fi Device1. On the Wi-Fi device, follow the procedure onthe device for connecting to another Wi-FiDirect device. See the device's user manualfor instructions.2. When you have completed the procedure,you should see a pop-up on your TV screensaying that a device that supports Wi-FiDirect has requested to connect. Select OK,and then press the v button to accept.3. The Connecting pop-up appears, followedby the Connected pop-up. When it closes,you should see the device listed on the Wi-FiDirect screen as connected.Through the Player Using PBC1. Select the Wi-Fi Direct device you want toconnect to this player, and then press the vbutton. The PBC/PIN pop up appears.2. Select pBC, and then press the v button.The PBC pop-up appears.3. Press the PBC button on the Wi-Fi Directdevice within 2 minutes.4. The Connecting pop-up appears, followedby the Connected pop-up. When it closes,you should see the device listed on the Wi-FiDirect screen as connected.Through the Player Using a PIN1. Select the Wi-Fi Direct device you want toconnect to this player, and then press the vbutton. The PBC/PIN pop up appears.2. Select pIN, and then press the v button.The PIN pop-up appears.3. Note the PIN code in the pop-up, and thenenter it into the appropriate field in the Wi-FiDirect device you want to connect.4. The Connecting pop-up appears, followedby the Connected pop-up. When it closes,you should see the device listed on the Wi-FiDirect screen as connected.| NOTES |\ The current wired or wireless network connection will bedisconnected when you use the Wi-Fi Direct function.\ Text files, such as files with a .TXT or .DOC extension, willnot display when you are using the Wi-Fi Direct function.English 29 |