Samsung BD-F6500 User Manual

Also see for BD-F6500: User manual User manual User manual

04 Settings6. Select a value to enter (IP Address, forexample), and then press v button. Usethe number keypad on your remote controlto enter the numbers for the value. You canalso enter numbers using the ▲▼ buttons.Use the ◄► buttons on the remote controlto move from entry field to entry field within avalue. When done with one value, press thev button.7. Press the ▲ or ▼ button to move to anothervalue, and then enter the numbers for thatvalue following the instructions in Step 6.8. Repeat Steps 6 and 7 until you have filled inall values.| NOTES |\ You can get the Network values from your Internetprovider.9. When finished, select OK, and then press thev button. The Security Screen appears.10. On the Security screen, enter your network'sSecurity Code or Pass Phrase. Enternumbers directly using the number buttonson your remote control. Enter letters byselecting a letter with the ▲▼◄► buttons,and then pressing the v button.11. When finished, select Done at the right of thescreen, and then press the v button.The player verifies the network connectionand then connects to the network.12. After the player verifies the network, selectOK, and then press the v button.Ğ WPS(PBC)1. In the Home screen, select Settings, andthen press the v button.2. Select Network, and then press the vbutton.3. Select Network Settings, and then press thev button.4. Select Wireless in the Network Settingsscreen, and then press the v button.5. Press the ▲ button on your remote, and thenpress the ► button to select the WPS(PBC).6. Press the v button on your remote. The"Press the PBC button" message appears.7. Press the WPS(PBC) button on your routerwithin two minutes. Your player automaticallyacquires all the network settings values itneeds and connects to your network.The Network Status screen appears. Theplayer connects to the network after thenetwork connection is verified.Ğ WPS(PIN)Before you begin, open the router's setup menuon your PC and access the screen with the WPSPIN entry field.1. In the Home screen, select Settings, andthen press the v button.2. Select Network, and then press the vbutton.3. Select Network Settings, and then press thev button.4. Select Wireless in the Network Settingsscreen, and then press the v button.The player searches for and then displays alist of the available networks.5. Select the desired network, and then pressthe ► button.6. Select the WPS(PIN), and then press thev button. The PIN pop-up appears.7. Enter the PIN into the WPS PIN entry field inthe router's Set Up screen and then save thethe screen.| NOTES |\ Contact the manufacturer of the router for instructionsexplaining how to access the route's Set Up screens orrefer to the router's user's manual.\ For WPS connection, set your wireless router’s securityencryption to AES. Setting to WEP security encryptiondoes not support WPS connection.English 29 |Downloaded From Disc-Player.com Samsung Manuals