Samsung BD-F5100 User Manual

Contents

Remote ControlTour of the Remote ControlInstalling batteriesSCREENVIEW A-BFULLBONUS REPEAT REPEATTurn the player on and off.Allows you to repeat A-B disc.Press the number buttons to operate options.Press to open and close the disc tray.Use to enter the disc menu.Press to skip backwards or forwards.Press to stop a disc.Press to use bonusview function.Return to the previous menu.These buttons are used both for menus on theplayer and also several Blu-ray Disc functions.Use to select menu items and change menuvalues.Press to use the Tools menu.Use to access various audio functions on adisc (Blu-ray Disc/DVD).Press to play a disc.Press to pause a disc.Turn the TV on and off.Press to switch the Blu-ray Disc/DVD’ssubtitle language.Use to enter the popup menu/title menu.Press to search a disc backwards orforwards.Press to move to the Home menu.Press to see the full screen on a TV.During the Blu-ray Disc/DVDs playback, FullScreen button does not operate.Press to exit the menu.Use to display the playback informationwhen playing a Blu-ray Disc/DVDs.Allows you to repeat a title, chapter, track ordisc.TV volume adjustment.After setup, allows you to set the inputsource on your TV.✎ NOTES` If the remote does not operate properly:• Check the polarity (+/–) of the batteries.• Check if the batteries are drained.• Check if the remote sensor is blocked byobstacles.• Check if there is any fluorescent lighting nearby.! CAUTION` Dispose of batteries according to local environmentalregulations. Do not put them in the household trash.ConnectionsConnecting to a TVConnect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product tothe HDMI IN jack on your TV.- Do not connect the power cord to the wall outlet until you have made all the otherconnections.- When you change the connections, turn off all devices before you start.✎ NOTES` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital AudioOut on the player to an audio system to hear audio.` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual ofyour TV.` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for thefirst time, the player automatically sets the HDMI output resolution to the highest supported by the TV.` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)HDMI cable.` HDMI outputs only a pure digital signal to the TV.If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears onthe screen.AudioVideo7