Samsung BD-E6500 User Manual

Also see for BD-E6500: User guide Software guide User manual User manual User manual

Contents

Settings1. Select Start in the Network Settings screen,and then press the [5I button. The playersearches for and then displays a list of theavailable networks.2. Select the desired network, and then pressthe [5I button.3. Select Next, and then press the [5I buttonagain.4. On the Security screen, enter your network'sSecurity Code or Pass Phrase. Enternumbers directly using the number buttonson your remote control. Enter letters byselecting a letter with the AT <01111 ~ buttons,and then pressing the [5I button.5. When done, select Next at the right of thescreen, and then press the [5I button.6. The Network Status screen appears.The player attempts to verify the networkconnection and fails.7. Select IP Settings on the right of the screen,and press the [5I button. The IP Settingsscreen appears.8. Select the I P Mode field, and then set it toManual.9. Use the number keypad on your remote toenter the Network values. Use the AT <01111 ~buttons on the remote to move from entryfield to entry field.I NOTE I~ You can get these values from your Internet provider. Youcan also view these values on most Windows computers.For instructions, see "Getting the Network Setting Values.''on page 27.10. When done, highlight OK, and then press [5Ibutton. The Network Status screen appears.The product verifies the network connectionand then connects to the network. When itis done, highlight OK, and then press [5Ibutton.128 Englisho WPS(PBC)One of the easiest ways to set up the wirelessnetwork connection is using the WPS(PBC)function. If your wireless router has a WPS(PBC)button, follow these steps:1 . Open the Home screen.2. Press the BLUE {D) button on the remotecontrol.3. Press the WPS{PBC) button on your routerwithin two minutes. Your player automaticallyacquires all the network settings values itneeds and connects to your network.The Network Status screen appears. Theplayer connects to the network after thenetwork connection is verified.Wi-Fi DirectThe Wi-Fi Direct function allows you to connectWi-Fi Direct devices to the player and each otherusing a peer-to-peer network, without a wirelessrouter.1. Turn on the Wi-Fi direct device and activateits Wi-Fi Direct function.2. In the Home screen, select Settings, andthen press the [5I button.3. Select Network, and then press the [5Ibutton.4. Select Wi-Fi Direct, and then press the [5Ibutton.The Wi-Fi Direct devices that you canconnect appear.