English 2104 ConnectionsConnecting to a TV with an Audio/Video cables and RF cable1. Connect the RF cable as shown.2. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red)terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminalsof your TV.3. Plug in the product and TV.4. Turn on the product and TV.✎ NOTE` The RF cable connection of this product sends only signals of TV. You must connect the Audio/Video cables to watchoutput from your product.` Noise may be generated if the audio cable is placed too close to the power cable.` If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 25~26)` The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.` If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the product.ConnectionsTo ANT INTo TVRF cableTo ANT INPUTAudio/Video cableWhiteRed Yellow
