Menu
Samsung AP17K series Manual
                                                                |
6. Remove the Shield.(TCO 99)7. Using pinch-nose pliers or ling-nose pliers,acrefully disconnect the Anode Cap from theCRT.Warning: Do not touch the Anode contacton the CRT (High Voltage mayremain).3-1-3 Removing the CRT Socket PCB1. Complete all previous steps.2. Lift up the Video Spring and remove the CRTSocket PCB from the CRT.3. Disconnect all connectors on the CRT SocketPCB.4. Using a solder iron, disconnect Ground (GND)on the back of the Video Shield and removethe Shield Cap.5. Remove the screw on the front of the ShieldSocket.6. Desolder the 4 tabs on the CRT Socket PCBand remove Shield.7. Place the Video PCB on a flat, level surfacethat is protected from static electricity.3-1-4 Removing the Main PCB1. Complete all previous steps.2. Disconnect the Degaussing Coil at CN603 onthe Main PCB.3. Disconnect all easily accessible ground wireson the PCB and Bottom Chassis.4. Disconnect the DY connector at the CN401connector on the Main .5. Using the jig, release the snaps (2) connectingthe Front Cover and the PCB then lift up theBottom to separate the two Shield.6. Disconnect the Tilt connector at theCN2(CN22) connector on the Main PCB.7. Disconnect the Sub PCB connector at theCN201 connector on the Main PCB.8. Remove the screws on the back and alongeach side of the Bottom Chassis.9. Carefully lift the Main PCB Ass’y and removethe remaining ground wires.10. Place the Main PCB Ass’y on a flat, levelsurface that is protected from static electricity.3-1-5 CRT Ass’y Disassembly1. Complete all previous steps.2. Straighten the Degaussing Coil Assemblycoated metal ties and lift the Coil Ass’y fromthe CRT.3. Remove the four corner screws and lift theCRT up and away from the Front CoverAssembly and place it on a padded surface.Caution: Do not lift the CRT by the neck.If you will be returning this CRT tothe monitor, be sure to place the CRTface downward on a protective pad.3 Disassembly and Reassembly3-2 AP17K*/AP17J*3-2 ReassemblyReassembly procedures are in the reverse order of Disassembly procedures.Figure 6Figure 7Figure 5 |
Related manuals for Samsung AP17J series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved