English _25● CONNECTIONSCONNECTING TO A TV(VIDEO)Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear ofthe Duo HD player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.Turn on the Duo HD player and TV.Press the input selector on your TV remote control until the Video signal from the Duo HD player appears on theTV screen.If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUTSEL. button on the remote control and select VIDEO as the external source of the TV.Noise may be generated if the audio cable is placed too close to the power cable.If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 26~29)The number and position of terminals may vary depending on your TV set. Please refer to the user's manual ofyour TV.If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the Duo HDplayer.The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.(See page 42)1.2.3.•M RedYellow White
