Samsung AH68-00723A User Manual

Using the Zoom & 3D Sound FunctionsUsing the Zoom Function (DVD/VCD)11 During play or pause mode, press theZOOM button on the remote. A square willbe displayed on screen.22 Use the UP/DOWN or LEFT/RIGHTbuttons to select the part of the screen youwant to zoom in on.33 Press the ENTER button.- During DVD play, press ENTER to zoom in2X/4X/2X/Normal in order.- During VCD play, press ENTER to zoom in2X/normal in order.Using the 3D Sound FunctionThe simulated surround effect (SPATIALIZER N-2-2)depends on the disc contents. If you connect theunit to your stereo system, you can enhance soundquality and produce a greater surround effect.This feature is useful when you are using the DVDplayer with a two channel stereo through theanalog outputs.(Discs which are recorded with LPCM or DTS willnot work. When the DIGITAL OUTPUT is set to BITSTREAM in the SETUP MENU, the 3D Soundfunction will not work.)11 During play, press the 3D SOUND button.The 3D SOUND mark will be displayed onscreen. (Be sure the DIGITAL OUTPUT is set toPCM.)22 Press the UP/DOWN buttons to turn the 3DSound feature on or off.NOTE• 3D Sound is possible only on discsrecorded using DOLBY SURROUND orDOLBY DIGITAL. However, some ofthese discs do not contain rear channelsound signals.• Depending on the disc, the Zoom and3D Sound function may not work.28