Samsung 7000 series User Manual

Also see for OfficeServ 7000 Series: System administration guide User guide User instruction User guide User guide

Contents

23English03 Basic FeaturesSPDIF OutputSPDIF (Sony Philips Digital Interface) is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.■ Audio Format: During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.■ Audio Delay: Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).Sound Reset (OK / Cancel)Reset all sound settings to the factory defaults.Setup Menu¦ Setting the TimeO MENUm → Setup → Time → ENTERETime■ Clock: Setting the clock is for using various timerfeatures of the TV.O The current time will appear every time you pressthe INFO button.✎ If you disconnect the power cord, you have to setthe clock again.Clock Mode (Auto / Manual)– Auto: Set the current time automatically using thetime from a digital channel.✎ The antenna must be connected in order to setthe time automatically.– Manual: Set the current time manually.✎ Depending on the broadcast station and signal,the auto time set up may not be correct. In thiscase, set the time manually.Clock Set: Set the Month, Day, Year, Hour, Minute andam/pm manually.✎ Available only when Clock Mode is set toManual.✎ You can set the Month, Day, Year, Hour andMinute directly by pressing the number buttonson the remote control.DST (Daylight Saving Time) (Off / On): Switches theDaylight Saving Time function on or off.✎ This function is only available when the ClockMode is set to Auto.Time Zone: Select your time zone.✎ This function is only available when the ClockMode is set to Auto.¦ Using the Sleep TimerO MENUm → Setup → Time → Sleep Timer →ENTERE■ Sleep Timer t : Automatically shuts off the TVafter a preset period of time. (30, 60, 90, 120, 150 and180 minutes).✎ To cancel the Sleep Timer, select Off.¦ Setting the On / Off TimerO MENUm → Setup → Time → Timer 1 →ENTERE■ Timer 1 / Timer 2 / Timer 3: Three different on / offtimer settings can be made. You must set the clock first.On Time / Off Time: Set the hour, minute, and activate/ inactivate. (To activate the timer with the setting you’vechosen, set to Activate.)Volume: Set the desired volume level.Source: Select TV or USB content to be played whenthe TV is turned on automatically. (USB can be selectedonly when a USB device is connected to the TV)Antenna (when the Source is set to TV): Select Air orCable.Channel (when the Source is set to TV): Select thedesired channel.10 TV Cable 100 00 am00 00 am▲▼Timer 1On TimeOff TimeVolumeInactivateInactivateSun Mon Tue Wed Thu Fri SatOnceSource Antenna ChannelRepeatL Move U Adjust E Enter R Return