English - 35Air/Cable5 Press the or button select Antenna, then press the ENTER button.Press the or button to select Air or Cable, then press the ENTER button. ® Air: Air antenna signal.Cable: Cable antenna signal.Changing the PIP Channel6 Press the or button to select Channel, then press the ENTER button.Press the or button at the bottom of the remote to select the desiredchannel in the PIP window, then press the ENTER button.Press the EXIT button to exit. ® You can select only analog TV broadcasts on the PIP screen (sub-picture).Easy Setting1 Press the TOOLS button on the remote control.2 Press the or button to select PIP, then press the ENTER button.3 Press the or button to select a particular item.4 Press the or button to select the required option.5 Press the EXIT or TOOLS button to exit.Changing the Position of the PIP Window4 Press the or button to select Position, then press the ENTER button.Press the or button to select the desired PIP window position, then pressthe ENTER button.® In Double Window ( ) and Double Wide ( ) modes, Position cannotbe selected.ReturnEnterPIPPIP : OnSize :Position :Air/cable : CableChannel : Cable 3MoveAirCableReturnEnterPIPPIP : OnSize :Position :Air/cable : CableChannel : Cable 3MoveReturnPIPPIP On Size :Position :Air/Cable : CableChannel : Cable 3Move AdjustPIPPIP : OnSize :Position :Air/cable : CableChannel : Cable 3ReturnEnterMoveCable 11TOOLSDevice ListPicture Mode : StandardSound Mode : CustomPIPMove Enter Exit
