Samsung 5003 User Manual

Also see for 5003 Series: User manual User manual User manual User manual User manual

❑ Using the Media Play Menu1. Press the MENU button. Press the ▲ or ▼ button to selectApplications, then press the ENTERE button.2. Press the ▲ or ▼ button to select Media Play (USB), then press theENTERE button.3. Press the ◄ or ► button to select an icon (Videos, Music, Photos,Settings), then press the ENTERE button.✎ It might not work properly with unlicensed multimedia files.✎ Need-to-Know List before using Media Play (USB)x Supported file systems are FAT and NTFS.x Certain types of USB Digital camera and audio devices may notbe compatible with this TV.x Media Play only supports USB Mass Storage Class (MSC)devices. MSC is a Mass Storage Class Bulk-Only Transportdevice. Examples of MSC are Thumb drives and Flash CardReaders. Devices should be connected directly to the TV’s USBport. USB HDD is not supported.x Before connecting your device to the TV, please back up your filesto prevent them from damage or loss of data. SAMSUNG is notresponsible for any data file damage or data loss.x A USB device that requires high power (more than 0.5A) may notbe supported.x Do not disconnect the USB device while it is loading.x The higher the resolution of the image, the longer it takes todisplay on the screen.x The maximum supported JPEG resolution is 15360 x 8640 pixels.x If a file is corrupted or the TV does not support the file type, the“Not Supported File Format” message appears.x The TV cannot play MP3 files with DRM that have beendownloaded from a for-pay site. Digital Rights Management(DRM) is a technology that supports the creation, distribution,and management of digital content in an integrated andcomprehensive way, including protecting the rights and interestsof content providers, preventing illegal copying of contents, andmanaging billings and settlements.x PTP device is not supported.x If an over-power warning message is displayed while you areconnecting or using a USB device, the device may not berecognized or may malfunction.x If the TV has no input during the time set in Auto ProtectionTime, the Screensaver will run.x The power-saving mode of some external hard disk drives may bereleased automatically when your connect them to the TV.x If you use a USB extension cable, the TV may not recognize theUSB device or may not be able to read the files on the device.If a USB device connected to the TV is not recognized, the list of files onthe device is corrupted, or a file in the list is not played, connect the USBdevice to a PC, format the device, and check the connection.x If a file you deleted from the PC is still found when you run MediaPlay, use the “Empty the Recycle Bin” function on the PC topermanently delete the file.x Photos only supports sequential jpeg format.x The scene search and thumbnail functions are not supported inthe Videos.x If the number of files and folders saved on a USB storage device isapproximately over 4000, the files and folders may not appear andsome folders may not be opened.x The maximum displayed number of files, including sub folders, inone folder of USB storage device is 2000.x The media may not be playing smoothly when using the devicelower than USB 2.0.Videos1. Press the ◄/► buttons to select Videos, then press the ENTEREbutton in the Media Play menu.2. Press the ◄/►/▲/▼ buttons to select the desired video in the filelist.3. Press the ENTERE button or � (Play) button.- The selected file is displayed on the top with its playing time.- If video time information is unknown, playing time and the progressbar are not displayed.- During video playback, you can search using the ◄/► buttons.✎ In this mode, you can play movie clips contained in a game, but youcannot play the game itself.y Supported Subtitle Formats- ExternalName File extensionMPEG-4 timed text .ttxtSAMI .smiSubRip .srtSubViewer .subMicro DVD .sub or .txtSubStation Alpha .ssaAdvanced SubStation Alpha .ass- InternalName Container FormatXsub AVI Picture FormatSubStation Alpha MKV Text FormatAdvanced SubStation Alpha MKV Text FormatSubRip MKV Text FormatMPEG-4 Timed text MP4 Text Formaty Supported Video FormatsFileExtension Container Video Codec Resolution Framerate(fps) Bitrate(Mbps) AudioCodec*.mp4 MP4DivX3.11 / DivX4/ DivX5 / DivX6 1920x1080 6~30 20MbpsMP3 /ADPCM /AACH264 1920x1080 6~30 20MbpsVC-1 1920x1080 6~30 20MbpsMJPEG 640x480 6~30 10Mbps"*.avi*.mkv""AVIMKV"DivX3.11 / DivX4/ DivX5 / DivX6 1920x1080 6~30 20MbpsMP3 / AC3/ LPCM /ADPCM /DTSMPEG 1/2/4 1920x1080 6~30 20MbpsH264 1920x1080 6~30 20MbpsMJPEG 640x480 6~30 10Mbps"*.asf*.wmv" ASFDivX3.11 / DivX4/ DivX5 / DivX6 1920x1080 6~30 20Mbps MP3 / AC3/ LPCM /ADPCM/ WMA /WMA ProMPEG 1/2/4 1920x1080 6~30 20MbpsH.264 1920x1080 6~30 20Mbps"*.ts*.trp*.tpTSMPEG2 -TS 1920x1080 6~30 20Mbps AC3 / AAC/ MP3 /DD+H. 264 1920x1080 6~30 20Mbps"*.dat*.mpg*.mpeg*.vob"PSMPEG1 1920x1080 6~30 20Mbps AC3 /MPEG /LPCM /AACMPEG2 1920x1080 6~30 20MbpsH. 264 1920x1080 6~30 20Mbps*.3gp 3GPPMPEG 1/2/4 1920x1080 6~30 20MbpsMP3H.264 1920x1080 6~30 20Mbps*.flv flashformatsH.264 1920x1080 6~30 20MbpsMP3Sorenson H.263 1920x1080 6~30 20MbpsThe picture is black and white. If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.When changing channels, the picturefreezes or is distorted or delayed.y If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It may takeup to 20 minutes)y Set the output resolution of the cable box to 1080i or 720p.Sound Problem First of all, please perform the Sound Test to confirm that your TV audio is properly operating.(Go to MENU - Support - Self Diagnosis - Sound Test)If the audio is OK, the sound problem may caused by the source or signal.There is no sound or the sound is too low atmaximum volume.Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.The picture is good but there is no sound. y If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’saudio option to HDMI when you have a HDMI connected to your TV).y Reboot the connected device by reconnecting the device’s power cable.The speakers are making an inappropriatenoise.y Check the cable connections. Make sure a video cable is not connected to an audio input.y For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.y Perform the Sound Test as explained above.No Picture, No VideoThe TV will not turn on. y Make sure the AC power cord is securely plugged into the wall outlet and the TV.y Make sure the wall outlet is working.y Try pressing the POWER button on the TV to make sure the problem is not the remote.If the TV turns on, refer to ‘Remote control does not work’ below.The TV turns off automatically. y Ensure the Sleep Timer is set to Off in the Time menu.y If your PC is connected to the TV, check your PC power settings.y Make sure the AC power cord is plugged in securely to the wall outlet and the TV.y When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if thereis no signal.There is no picture/video. y Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).y Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. Forexample, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.y Make sure your connected devices are powered on.y Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.y Reboot the connected device by reconnecting the device’s power cable.RF(Cable/Antenna) ConnectionThe TV is not receiving all channels. y Make sure the coaxial cable is connected securely.y Please try Auto Program to add available channels to the channel list.go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in themenu. There are 3 options. (STD, HRC and IRC)y Verify the antenna is positioned correctly.No Caption on digital channels. y Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.y Some channels may not have caption data.The picture is distorted: macroblock, error,small block, dots, pixelization.y Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and actionmovies.y A weak signal can cause picture distortion. This is not a TV problem.OthersPurple/green rolling horizontal bars andbuzzing noise from the TV speakers withComponent cable connection.Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box hasa grounding issue. Replace the Component video cables with an HDMI connection.The picture will not display in full screen. y HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.y Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.y Adjust the picture size option on your external device or change the TV to full screen.The remote control does not work. y Replace the remote control batteries with correct polarity (+/–).y Clean the transmission window located on the top of the remote control.y Try pointing the remote directly at the TV from 5~6 feet away.The cable/set top box remote controldoes not turn the TV on or off, or adjustthe volume.Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for theSAMSUNG TV code.A “Mode Not Supported” messageappears.Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolutionsettings in this manual.Caption on the TV menu is greyed out. y You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component.y Caption must be activated on the external device.There is a plastic smell from the TV. This smell is normal and will dissipate over time.Other Restrictionsx Video content will not play, or not play correctly, if there is an error inthe content or the container.x Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table above.x If the Index Table is in error, the Seek (Jump) function is not supported.x The menu may take longer to appear if the video’s bit rate exceeds10Mbps.x Video content can not be played, if there are many contents in one file.Video Decoder Audio DecoderSupports up to H.264, Level 4.1H.264 FMO / ASO / RS, VC1 SP/ MP / AP L4 and AVCHD are notsupported.MPEG4 SP, ASP :– Below 1280 x 720: 60 frame max– Above 1280 x 720: 30 frame maxH.263 is not supported.GMC is not support.Supports up to WMA7, 8, 9 STD, 9PRO, and 10 PROWMA 9 PRO and WMA 10 PROsupport 5.1 channel.(LBR mode of WMA Pro is notsupported.)WMA Lossless is not supported.Music1. Press the ◄/► buttons to select Music, then press the ENTEREbutton in the Media Play menu.2. Press the ◄/►/▲/▼ buttons to select the desired Music in the filelist.3. Press the ENTERE button or (Play) button.✎ During music playback, you can search using the ◄/► buttons.✎ (REW) and (FF) buttons do not function during play.✎ Only displays the files with MP3 file extensions. Other file extensionsare not displayed, even if they are saved on the same USB device.✎ If the sound is abnormal when playing MP3 files, adjust theEqualizer in the Sound menu. (An over-modulated MP3 file maycause a sound problem.)Photos1. Press the ◄/► buttons to select Photos, then press the ENTEREbutton in the Media Play menu.2. Press the ◄/►/▲/▼ buttons to select the desired photo in the filelist.3. Press the ENTERE button or (Play) button.✎ NOTE- While a photo list is displayed, press the (Play) / ENTEREbutton on the remote control to start the slide show.- All files in the file list section will be displayed in the slide show.- During the slide show, files are displayed in order.- During the slide show, you can adjust the slide show speed using(REW) or (FF) button.- You can move to other file using the ◄/► buttons.Supported Photo FormatsImage Photo ResolutionJPEG Base-line 15360 x 8704Progressive 1024 x 768Other Restrictionsy CMYK and YCCK Color space JPEGs are not supported.Playing Multiple Files■ Playing selected video/music/photo files1. Press the Yellow button in the file list to select the desired file.2. Repeat the above operation to select multiple files.✎ NOTE- The c mark appears to the left of the selected files.- To cancel a selection, press the Yellow button again.- To deselect all selected files, press the TOOLS button and selectDeselect All.3. Press the TOOLS button, and then select Play Selected Contents.■ Playing the video/music/photo file group1. While a file list is displayed, move to any file in desired group.2. Press the TOOLS button, and then select Play Folder.Media Play - Additional Functions■ Videos/Music/Photos Play Option menusWhen playing a file, press the TOOLS button.Category Operation Videos Music PhotosTitle You can move the other filedirectly. cRepeat Mode You can play movie and music filesrepeatedly. c cPicture Size You can adjust the picture size toyour preference. cPicture Mode You can adjust the picture setting. c cSound Mode You can adjust the sound setting. c c cSubtitle SettingsYou can play the video withSubtitles. This function only worksif the subtitles are the same filename as the video.cAudio Format You can select the digital audiooutput format. cAudio LanguageYou can change the audiolanguage if the video has morethan one language.cStop SlideShow /Start Slide ShowYou can start or stop a Slide Show. cSlide ShowSpeedYou can select the slide showspeed during the slide show. cBackgroundMusicYou can set and selectbackground music when watchinga Slide Show.cZoom You can zoom into images in fullscreen mode. cRotate You can rotate images in fullscreen mode. cInformation You can see detailed informationabout the played file. c c cOther InformationInstalling the Wall Mount KitThe wall mount kit (sold separately) allows you to mount the TV on thewall.For detailed information on installing the wall mount, see the instructionsprovided with the wall mount items. Contact a technician for assistancewhen installing the wall mount bracket. Samsung Electronics is notresponsible for any damage to the product or injury to yourself or othersif you elect to install the wall mount on your own.Wall Mount Kit Specifications (VESA)✎ The wall mount kit is not supplied, but sold separately.Install your wall mount on a solid wall perpendicular to the floor. Whenattaching to other building materials, please contact your nearest dealer.If you install the TV on a ceiling or slanted wall, it may fall and result insevere personal injury.✎ NOTEx Standard dimensions for wall mount kits are shown in the tablebelow.x When purchasing our wall mount kit, a detailed installation manualand all parts necessary for assembly are provided.x Do not use screws that do not comply with the VESA standardscrew specifications.x Do not use screws that are longer than the standard dimensionor do not comply with the VESA standard screw specifications.Screws that are too long may cause damage to the inside of theTV set.x For wall mounts that do not comply with the VESA standard screwspecifications, the length of the screws may differ depending onthe wall mount specifications.x Do not fasten the screws too firmly. This may damage the productor cause the product to fall, leading to personal injury. Samsung isnot liable for these kinds of accidents.x Samsung is not liable for product damage or personal injury whena non-VESA or non-specified wall mount is used or the consumerfails to follow the product installation instructions.x Do not mount the TV at more than a 15 degree tilt.x Always have two people mount the TV on a wall.ProductFamily TV size ininches VESA screw hole specs(A * B) in millimeters StandardScrew QuantityLED-TV 40 200 X 200 M8 4Do not install your Wall Mount Kitwhile your TV is turned on. It mayresult in personal injury due toelectric shock.Securing the TV to the WallCaution: Pulling, pushing, or climbing onto the TV maycause the TV to fall. In particular, ensure that your childrendo not hang over or destabilize the TV; doing so may causethe TV to tip over, resulting in serious injuries or death.Follow all safety precautions provided on the includedSafety Flyer. For added stability, install the anti-fall device forsafety purposes, as follows.To prevent the TV from falling✎ Since the necessary clamps, screws, and string are not supplied,please purchase these additionally.1. Drive the screws into the clamps and firmly fasten them onto the wall.Make sure the screws are firmly fixed into the wall.2. Remove the screws from the back center of the TV, put the screwsinto the clamps, and then fasten the screws onto the TV again.3. Connect the clamps fixed onto the TV and the clamps fixed onto thewall with a strong cable and then tie the string tightly.✎ Verify all connections are properly secured. Periodically check theconnections for any sign of fatigue or failure. If you have any doubtabout the security of your connections, contact a professionalinstaller.✎ Install the TV close to the wall so that it does not fall.✎ It is safe to connect the string so that the clamps fixed on the wallare equal to or lower than the clamps fixed on the TV. Untie thestring before moving the TV.Kensington LockThe Kensington Lock is not supplied by Samsung. It is a device usedto physically fix the system when using it in a public place. Refer to themanual provided with the Kensington Lock for additional information onproper use.✎ Please find a “K” icon on the rear of the TV. The Kensington slot isbeside the “K” icon.✎ The position and color may differ depending on the model.Assembling the Cable managerCaption(On-Screen Text Messages)■ Caption: You can switch the caption function on or off. If captions arenot available, they will not be displayed on the screen.✎ The Caption feature does not work in Component or HDMImode.■ Caption Mode: You can select the desired caption mode.Default / CC1~CC4 / Text1~Text4: (analog channels only) TheAnalog Caption function operates in either analog TV channel modeor when a signal is supplied from an external device to the TV.(Depending on the broadcasting signal, the Analog Caption functionmay or may not work with digital channels.)Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digitalchannels only) The Digital Captions function works with digitalchannels.✎ Service1~6 may not be available in digital caption modedepending on the broadcast.■ Digital Caption Options: (digital channels only)Size: Options include Default, Small, Standard and Large. The defaultis Standard.Font Style: Options include Default and Styles 0 to 7. The default isStyle 0.Foreground Color: Options include Default, White, Black, Red,Green, Blue, Yellow, Magenta and Cyan.You can change the color of the letter. The default is White.Background Color: Options include Default, White, Black, Red,Green, Blue, Yellow, Magenta and Cyan. You can change thebackground color of the caption. The default is Black.Foreground Opacity: This adjusts the opacity of text. Options includeDefault, Transparent, Translucent, Solid and Flashing.Background Opacity: This adjusts the opacity of the captionbackground. Options include Default, Transparent, Translucent, Solidand Flashing.Return to Default: This option sets each Size, Font Style, ForegroundColor, Background Color, Foreground Opacity and BackgroundOpacity to its default.✎ Digital Caption Options are available only when Default andService1~Service6 can be selected in Caption Mode.✎ The Foreground and Background cannot be set to have the samecolor.Boot Logo: Enable/disable displaying the logo while the TV starts up.Eco Solution■ Energy Saving: This adjust the brightness of the TV in order toreduce power consumption. If you select Picture Off, the screen isturned off, but the sound remains on. Press any button except volumebutton to turn on the screen.■ No Signal Power Off : Sets how quickly the TV switches to standbymode, if no picture is being received.✎ Disabled when the PC is in power saving mode.■ Auto Power Off: The TV will be automatically turned off when no useroperation is received for 4 hours.Auto Protection TimeIf the screen remains idle with a still image for a certain period oftime defined by the user, the screen saver is activated to prevent theformation of ghost images on the screen.Support MenuSelf Diagnosis■ Picture Test: Use to check for picture problems. If the problemcontinues to occur, check the color pattern.■ Sound Test: Use the built-in melody sound to check for soundproblems.■ Signal Strength: (digital channels only) An HD channel’s receptionquality is either perfect or the channels are unavailable. Adjust yourantenna to increase signal strength.■ Reset: Reset all settings to the factory defaults.✎ The PIN input screen appears before the setup screen.✎ Enter your 4-digit PIN. Change the PIN using the Change PINoption.Software UpgradeSoftware Upgrade can be performed by downloading the latestfirmware from samsung.com to a USB memory device.HD Connection GuideRefer to this information when connecting external devices to the TV.Contact SamsungView this information when your TV does not work properly or when youwant to upgrade the software. You can find information regarding our callcenters and how to download products and software.Media PlayEnjoy photos, music and/or movie files saved on aUSB Mass Storage Class (MSC) device.PPOWERMEDIA.PConnecting a USB Device1. Turn on your TV.2. Connect a USB device containing photo, music and/or movie files tothe USB jack on the side of the TV.3. When USB is connected to the TV, you can select Media Play (USB)in Applications menu.TroubleshootingIf the TV seems to have a problem, first review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.Problem Possible SolutionFlickering and Dimming If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient featureslike the Energy Saving feature. If you follow below step with your remote, you can turn these features off or on.y Energy Saving : MENU → Setup → Eco Solution → Energy SavingComponent Connections /Screen ColorIf you find that the color on your Samsung television’s screen is not correct or black and White, first run a Self Diagnosis onthe TV to make sure there are no device issues.y Self Diagnosis : MENU → Support → Self Diagnosis → Picture TestIf the test is ok, try making sure:y Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have used theAV Out jack on your video source.y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr,and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to theblue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings youshould check before calling for a repair.y Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go in to “Picture” on user Menu then tryadjusting options mentioned above.Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly NoSignal Power Off feature.First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with the TVstill on but, turns it off after a certain period of time so as not to waste energy.y Sleep Timer : MENU → Setup → Time → Sleep TimerIf the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.y No Signal Power Off : MENU → Setup → Eco Solution → No Signal Power Offy Auto Power Off : MENU → Setup → Eco Solution → Auto Power OffTrouble Powering On Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote and itwill blink about 5 times before turning on.If you find that you are having trouble powering on your Samsung television, there are a number of things to check beforemaking a call to the service department.y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press thepower button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move themouse. Then try turning your TV on.If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you havea cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test thesignal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If thescreen displays the guide or info data, the problem is caused by the box.Stand Assembly If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.Cannot find channel Re-run plug and play.Poor picture First, perform the Picture Test and to see if your TV is properly displaying the test image.Go to MENU - Support - Self Diagnosis - Picture TestIf the test image is properly displayed, the poor picture may be caused by the source or signal.The TV image does not look as good as itdid in the store.If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (highdefinition) picture quality.Cable/Satellite subscribers: Try HD channels from the channel line up.Air/Cable Antenna connection: Try HD channels after performing Auto program.✎ Many HD channels are up scaled from SD(Standard Definition) contents.y Adjust the Cable/Set top box video output resolution to 1080i or 720p.The picture is distorted: macroblock error,small block, dots, pixelization.y Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and actionmovies.y A weak signal can cause picture distortion. This is not a TV problem.y Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.Color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect orloose connections may cause color problems or a blank screen.There is poor color or brightness. y Adjust the Picture options in the TV menu. (Go to Picture Mode / Color / Brightness / Sharpness)y Adjust the Energy Saving option in the TV menu. (Go to MENU - Setup - Eco Solution - Energy Saving)y Try resetting the picture to view the default picture setting. (Go to MENU - Picture - Picture Reset)There is a dotted line on the edge of thescreen.y If the picture size is set to Screen Fit, change it to 16:9.y Change the cable/satellite box resolution.TV Signal Strength is unavailable in theSelf Diagnosis Test menu.This function is only available for digital channels from an Antenna / RF / Coax connection.TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.The Channel menu is greyed out(unavailable).The Channel menu is only available when you select the TV source.Your settings are lost after 5 minutes orevery time the TV is turned off.If TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. Please change from Store Demomode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU →Setup → Plug & Play → ENTERE.You have intermittent loss of audio or video. Check the cable connections and reconnect them.Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for longterm use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.You see small particles when you lookclosely at the edge of the frame of the TV.This is part of the product’s design and is not a defect.POP (TV’s internal banner ad) appears onthe screen.Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright ordark pixels on the screen. These pixels will have no impact on the performance of the product.✎ Watch these troubleshooting on video at www.samsung.com/spsn.✎ Some functions and pictures shown in this manual are available on specific models only.✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.Storage and Maintenance✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth toprevent scratches.Do not spray water directly onto theproduct. Any liquid that goes into theproduct may cause a failure, fire, or electricshock.Clean the product with a soft clothdampened with in a small amount of water.Do not use a flammable liquid (e.g. benzene,thinners) or a cleaning agent.LicenseDivX Certified® to play DivX® video up to HD 1080p,including premium content.ABOUT DIVX VIDEO: DivX® is a digital video format createdby DivX, LLC, a subsidiary of Rovi Corporation. This is anofficial DivX Certified® device that has passed rigoroustesting to verify that it plays DivX video. Visit divx. com formore information and software tools to convert your filesinto DivX videos.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®device must be registered in order to play purchased DivXVideo-on-Demand (VOD) movies. To obtain your registrationcode, locate the DivX VOD section in your device setupmenu. Go to vod.divx.com for more information on how tocomplete your registration.DivX®, DivX Certified® and associated logos aretrademarks of Rovi Corporation or its subsidiaries and areused under license.Covered by one or more of the following U.S. patents:7,295,673; 7,460,668; 7,515,710; 7,519,274Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of DolbyLaboratories.For DTS patents, see http://patents.dts.com. Manufacturedunder license from DTS Licensing Limited. DTS, theSymbol, & DTS and the Symbol together are registeredtrademarks, and DTS 2.0 Channel is a trademark of DTS,Inc. © DTS, Inc. All Rights Reserved.Manufactured under a license from U.S. Patent No’s:6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452,5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907,8,050,434, 7,720,240, 7,031,474, 7,907,736 and7,764,802. DTS, the Symbol, and DTS and the Symboltogether are registered trademarks & DTS Studio Soundis a trademark of DTS, Inc. ©2012 DTS, Inc. All RightsReserved.The terms HDMI and HDMI High-Definition MultimediaInterface, and the HDMI Logo are trademarks or registeredtrademarks of HDMI Licensing LLC in the United States andother countries.Open Source License NoticeOpen Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.To send inquiries and requests for questions regarding open sources, contactSamsung via Email (oss.request@samsung.com). This product uses some software programs which are distributed under theIndependent JPEG Group.ICU License - ICU 1.8.1 and laterCOPYRIGHT AND PERMISSION NOTICECopyright (c) 1995-2008 International Business Machines Corporation and others Allrights reserved.Permission is hereby granted, free of charge, to any person obtaining a copy of thissoftware and associated documentation files (the "Software"), to deal in the Softwarewithout restriction, including without limitation the rights to use, copy, modify, merge,publish, distribute, and/or sell copies of the Software, and to permit persons to whomthe Software is furnished to do so, provided that the above copyright notice(s) andthis permission notice appear in all copies of the Software and that both the abovecopyright notice(s) and this permission notice appear in supporting documentation.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIESOF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ANDNONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THECOPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLEFOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA ORPROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHERTORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE ORPERFORMANCE OF THIS SOFTWARE.Except as contained in this notice, the name of a copyright holder shall not be usedin advertising or otherwise to promote the sale, use or other dealings in this Softwarewithout prior written authorization of the copyright holder.All trademarks and registered trademarks mentioned herein are the property of theirrespective owners.SpecificationsEnvironmental ConsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity50°F to 104°F (10°C to 40°C)10% to 80%, non-condensing-4°F to 113°F (-20°C to 45°C )5% to 95%, non-condensingModel Name UN40H5003AFDisplay Resolution 1920 x 1080Screen Size(Diagonal)40" Class (16.3 : 9)(39.5" measured diagonally)SoundOutput 10W x 2Dimensions (W x H x D)BodyWith stand36.1 x 20.9 x 3.7 inches(918.0 x 533.2 x 94.0 (mm))36.1 x 23.3 x 8.9 inches(918.0 x 592.6 x 227.6 (mm))WeightWithout StandWith Stand16.7 lbs (7.6 Kg)21.1 lbs (9.6 Kg)✎ Design and specifications are subject to change without prior notice.✎ This device is a Class B digital apparatus.✎ For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278-0799.- 10 -- 9 -- 14-- 13 -- 11 -- 15 -- 12 -- 16 -[UH5003-ZC]BN68-05829Q-01ENG.indb 2 2014-09-15 4:21:20

/ 2

Related manuals for Samsung 5003 Series