Samsung 4000 SERIES User Manual

Also see for 5070 Series: User manual Quick start guide User manual User manual E-manual

Contents

- 2 -Getting StartedAccessories• Remote Control & Batteries (AAA x 2)• Warranty Card / Safety Guide• Wire-Holder Stand• Owner’s Instructions• Power CordInput Cables (Sold Separately)• RS232• Audio• HDMI• HDMI-DVI• Component• Composite (AV)• Coaxial (RF)✎ Check the cable before plug-inCable PortsHDMIUSBOpticalDo not plug cable upside down.Be sure to check before plug-in.TV Controller (Panel Key)Power on Turns the TV on by pressing the controller in standby mode.Adjusting the volume Adjusts the volume by moving the controller from side toside when the power is on.Selecting a channel Selects a channel by moving the controller up and downwhen the power is on.Using the function menuPress the controller when the power is on, then the functionmenu screen appears. If you press it again, the functionmenu screen disappears.Selecting the Media PlaySelects the MEDIA.P by moving the controller in thefunction menu screen. The Media Play main screenappears.Selecting the MENU (3)Selects the MENU(3) by moving the controller in thefunction menu screen. The OSD(On Screen Display) of yourTV’s feature appears.Selecting the SourceList (V)Selects the Source List (V) by moving the controller in thefunction menu screen. The Source List screen appears.Power Off (#) Selects the Power Off (#) to turn the TV off by moving thecontroller in the function menu screen.✎ Exits the menu when pressing the controller more than 1 second.✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, youcannot operate it to move the up/down/left/right directions.Plug & Play (Initial Setup)When you turn the TV on for the first time, a sequence of on-screenprompts will assist in configuring basic settings. Press the POWERbutton. Plug & Play is available only when the Input source is set toTV.✎ Connecting the power cord and antenna. (refer to‘Connections’)Selecting a languageSelect Language of the OSD.Language= = = & Move =EnterPlug & PlayÇonÆEnglishEspañolFrançaisSelect the desired OSD (On ScreenDisplay) language.ÈSelecting a Home Use modeSelect ‘Home Use’ when installing this TV in your home.= = = Move =EnterPlug & PlayHome UseStore DemoÇoËn• Select the Home Use mode. StoreDemo mode is for retail environments.• When pressing TV controller, thefunction menu screen appears. Selectthe MENU(P) and press it more than 5seconds using the controller. The StoreDemo mode is set. Cancel the StoreDemo by selecting Source List(V)and pressing it more than 5 seconds.ÈSelecting an antennaSelect the Antenna source to memorize.Air StartCable StartAuto Start= = & Move =Enter 3=SkipPlug & PlayoÌÇnIn Cable mode, you can select the correctsignal source among STD, HRC, and IRCby pressing the Ÿ, ź, Ż or Ź button.ÈSetting the Clock ModeSet the Clock Mode.Clock Mode : AutoPlug & Play= = = =Enter 3 SkipnÆoÌSet the Clock Mode automatically ormanually.• If you select the Auto, set theDST(Daylight Saving Time).• On the DST screen, press ENTER,then select whether to turn DST(Daylight Savings Time) on or off. Selectthe time zone where you live.ÈViewing the HD Connection GuideThe connection method for the best HD screen quality is displayed.ÈEnjoy your TV.Press the ENTER button.TV ControllerFunction menuRemote control sensorMEDIA.PP 53Return