English - 1SETUPConfiguring the Setup MenuMenu LanguageYou can set the menu language.TimeClockSetting the clock is necessary in order to use the various timer features of the TV.The current time will appear every time you press the INFO button.If you disconnect the power cord, you have to set the clock again.Clock ModeYou can set up the current time manually or automatically.Auto: Set the current time automatically using the time from the digital broadcast.Manual: Set the current time to a manually specified time.Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the timemanually.The Antenna or cable must be connected in order to set the time automatically.Clock SetYou can set the current time manually.Set up this item when you have set Clock Mode to Manual.You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 minThe sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).The TV automatically switches to standby mode when the timer reaches 0.To cancel the Sleep Timer function, select Off.Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.Timer 1 / Timer 2 / Timer 3Three different on / off timer settings can be made. You must set the clock first.On Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)Volume: Select the desired turn on volume level.Channel: Select the desired channel.Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual.When Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over thedesired day and the c mark will appear.You can set the hour, minute and channel by pressing the number buttons on the remote control.Auto Power OffWhen you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV wasturned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV ison for too long time.BroadcastSubtitleYou can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitleand Hard of hearing is the subtitle for a hearing-impaired person.Subtitle → Off / OnSwitches subtitles on or off.Mode → Normal / Hard of hearingSets the subtitle mode.Subtitle LanguageSet the subtitle language.¦❑❑NN●––NN●NNNNT●●●●●NNN❑■●●●Plug & PlayMenu Language : English ►TimeBroadcastSecurityGeneralSetup