Setting the Digital Noise ReductionIf the broadcast signal received by your TV is weak, you can activate the Digital NoiseReduction feature to help reduce any static and ghosting that may appear on the screen.1. Follow the "Activating Picture Options" instructions numbers 1 and 2.(Refer to page 20)2. Press the .& or ~ button to select "Digital NR", then press the ENTER G' button.3. Press the .& or ~ button to select "Off', "Low", "Medium", "High" or "Auto".Press the ENTER G' button.• Off: Turns the screen noise reduction function off.• Low: Reduces screen noise at a low level.• Medium: Reduces screen noise at a medium level.• High: Reduces screen noise at a high level.• Auto: Automatically recognizes and reduces screen noise.Press the EXIT button to exit.Setting the HDMI Black LevelYou can select the black level on the screen to adjust the screen depth.1. Follow the "Activating Picture Options" instructions numbers 1 and 2.(Refer to page 20)2. Press the .& or ~ button to select "HDMI Black Level", thenpress the ENTER G' button.3. Press the .& or ~ button to select "Normal" or "Low", then pressthe ENTER G' button .• Normal: The screen gets brighter.• Low: The screen gets darker.".. This function is active only when an external device is connected to the TV viaHDMI(RGB signals). "HDMI Black Level" function may not be compatible withall external devices.Press the EXIT button to exit.Setting the Film ModeThe TV can be set to automatically sense and process film signals from all sources andadjust the picture for optimum quality.1. Follow the "Activating Picture Options" instructions numbers 1 and 2.(Refer to page 20)2. Press the .& or ~ button to select "Film Mode", then press the ENTER G' button.3. Press the .& or ~ button to select "Off' or "Auto", then press the ENTER G' button.Press the EXIT button to exit.".. "Film mode" is supported in TV, VIDEO, S-VIDEO, COMPONENT(480i / 1080i)and HDMI(480i / 1080i).