22CONNECTIONSConnect Audio In on the DVD player to Audio Out on the external analog component.• Be sure to match connector colors.2Analog signal components such as a VCR or TV.Press AUX on the remote control to select ‘DIGITAL IN / AUX1 / AUX 2’.• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.• You can also use the FUNCTION button on the main unit.The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.Connecting External ComponentsConnect the Digital Input (OPTICAL) to the Digital Output on the external digital component.13DIGITAL OUTExample: Digital signal components such as a Set-Top Box or CD Recorder.Connecting an External Digital / Analog ComponentOptical Cable(not included)Audio CableIf the external analogcomponent has only oneAudio Out, connect eitherleft or right.• If you have connected an external digital component and an Analog component to Video In (1, 2) at thesame time, there will be video from AUX 1 even when you select DIGITAL IN.• If you have connected Audio In (L, R) to 1, connect Video In to 1. If you have connected Audio In (L, R)to 2, connect Video In to 2.• When you select Aux 1 or 2, you are selecting Video 1 or 2 inputs respectively.Note
