Samsung 2.0041112184342e16 Instruction Manual

GBGB37 38When the button is pressed, a presetbroadcast station is selected.Hold in the button. Automatic searchingbegins, and then stops when a station is tuned in.Press the button to tune to the chosenstation. The frequency changes incrementally in eitherdirection each time the corresponding button is pressed.Listening to the RadioAuto Station 1Auto Station 2Manual StationPress the Tuner(Band)button.1 Select a broadcast station.2• The selection toggles backand forth between "FM" and"AM" each time theTuner(Band) button ispressed.Press the MO/ST button. (FM only)• The selection toggles back and forth between “STEREO” and “MONO”each time the MO/ST button is pressed.• In a poor reception areas, select Mono mode for a clear, interference-freebroadcast.To Listen in Mono/StereoAudioMO/STRemoteControlUnitPress the Stop ( ) button to select the PRESET mode.Then press the button to select a stationstored in the preset. See the instructions on the next pageto preset stations.Press the Stop ( ) button to select the MANUAL modeon the front panel. Then hold in the button tomake the unit begin automatically searching for broadcaststations.Press the Stop ( ) button to select the MANUAL modeon the front panel. Press the button to tune tothe desired station. The frequency changes incrementallyin either direction each time the corresponding button ispressed.Auto Station 1Auto Station 2Manual Station1 Select a broadcast station.2MainUnitPress the Function button toselect the desired band (FM,AM).You can listen to the chosen band (FM, AM broadcast stations) by using either theautomatic or manual tuning operation.Presetting stations• Follow steps 3~5 again.To store other Channels• See the previous page.To tune in a preset stationExample: Presetting FM 89.1 in the memoryMH ZL RLFEPROGRAM MH ZL RLFEPROGRAM MH ZL RLFEL RLFEMH ZL RLFEMH ZL RLFEPress the Tuner(Band) buttonand select the FM band.Select MANUAL by pressingthe Stop ( ) button on themain unit.1 Use the andbutton to tune to 89.12• The selection toggles back and forth between “FM” and “AM”each time the Tuner(Band) button is pressed.34 5 6Press the Program button onthe remote control, FM1 willflash. If you want to save 89.1to FM1, press Program again.To preset other stations,follow steps 1~4 again.If you want to save 89.1 to anotherpreset location(FM2~FM15), pressor , then pressProgram to save it to that location.You can store up to:15 FM stations15 AM stations• FM Frequency Modulation• AM(MW) Medium Wave