trotAbe hoot ngCHECK THESE POINTS iF YOUR DISHWASHER...ii i i iiiNo cycle is selected.Will not start. The power cable is not connected.The water supply does not work.The Control Panel is locked.A circuit breaker is open.takinatoo.:_ 10na_ Cold water is being supplied.It!swith an operation orCycle.The cycle selected was unsuitable.The water temperature is low.Low water pressure.The water is too hard.Dishwasher detergent was notThere are food used.The door is not closed completely. Check if the door is latched and closedparticles remainingon dishes.(Not cleaningproperly.)completely.Select a proper cycle.Connect the power cable properly.Check if the water supply valve is open.Unlock the child lock, (See page 10.)Reset the circuit breaker.Check if the water supply line is connectedto a hot water supply.(Additional time is required to heat coldwater.)Select a cycle according to the number andsoil level of the dishes, as directed in thismanual.Connect the water supply line to a hotwater supply.For best performance, the temperature ofthe supplied water should be 120 °F (49 °C).The water pressure should be between20 and 120 psi (140 - 830 kPa).Use a commercial dishwasher cleaner.Use high-quality, fresh detergent with rinseaid.Use automatic dishwasher detergent.We recommend a powder or gel typedishwasher detergent.il i_i _i i _ iiI ii ii ii ii ii ii ii iDetergent remains in thedispenser.There is no rinse aid.A nozzle is clogged.The dishes are improperly loaded.Too many dishes have beenloaded.Make sure large items such as cookiesheets, cutting boards, or contaners, etc.are not blocking the detergent dispenserand preventing it from opening properly.Rearrange the dishes so they do notinterfere with detergent dispenseroperation.Check the dispenser and add rinse aid.Use liquid type rinse aid.Clean the nozzle. See pages 22 and 23.Rearrange the dishes so they do notinterfere with nozzle rotation and detergentdispenser operation.Load only an appropriate number of dishes.Load your dishes as recommended.(See page 16.)English o 25