SKMECHA01 MECHWARNING! ENSURE PUMP IS ISOLATED FROMELECTRICITY AND WATER SUPPLY. IF INDOUBT CONSULT A COMPETENTTRADESMAN.Pump should be serviced in horizontalposition with couples disconnected and waterand electricity supply isolated.DO NOT RUN PUMP DRY. ALLOW WATER TOFILL PUMP TO LUBRICATE SEALS BEFORESTARTING. CHECK FOR LEAKS DURING TESTBEFORE BEING SATISFIED PUMP IS OKPLEASE NOTE:By using the parts included in this pack to repair your pump, you willbe invalidating any warranty you have on the pump.Returns:If you need to return this pack for any reason please ensure theoriginal packaging and these instructions leaflets are returned also.If you have any questions or queries regarding this spares pack orany other pump related questions please contact us.UK:Salamander Pumped Shower Systems LimitedUnit 2c, Colima Avenue Enterprise Park WestSunderland SR5 3XETel: 0191 516 2002Email: tech@salamanderpumps.co.ukEire:MTA agencies Ireland Fearn House,Unit 4 Jamestown Business ParkJamestown Road Finglas,Dublin 11Tel: +353 (0)1 864 3363Email: service@mtagencies.ieSalamander Pumps Shower Systems LimitedUnit 2c Colima Avenue, Enterprise Park West,Sunderland, SR5 3XETelephone: 0191 516 2002Facsimile: 0191 548 4445Email: sales@salamanderpumps.co.ukwww.salamanderpumps.co.ukInstructions VIDEOLINK:Document SSI.10 December15. Issue 1INTRODUCTIONAll CT pump variantsTools required :• Pliers• Seal Tool - XTOOLS 01• M6 Allen bit/Wrench• Torque Driver• Soap Water Solution 5%Parts in Service kit:• Rotary Seal 10mm - SROTAR02 (14) x 2• Static Seal 10mm - SSTATI02 (13) x 2• Body O ring 59.6 mm OD - SORING17 (BOR)Blue EPDM (17) x 2• Wire Clip- FWIREC01 (16) x 2• 5. M6 Allen Bolt M6 X 45mm - FBOLTM04 (20)x 8• M6 Spring Washer- FWASHE03 (21) x 8• Filter Washer-SFILTE01 (26) x 2• Rubber Washer-SFLATW01(25) x2• Seal Tool - XTOOLS01