Sagem F@ST 1500 Reference Manual

Also see for F@ST 1500: Reference manual User guide

Contents

Sagem F@ST 1500 Reference Manual Manual pdf 17 page image

2 - Description and physical installationSAGEM F@st™ 1500 Reference Manual - 288053220-03Page 2-5 Reproduction and communication prohibited without the written permission of EEEE2.2 Physical Installation2.2.1 Installation instructionsEnvironment¾ The SAGEM F@st™ 1500 must be installed and used inside a building.¾ The room temperature must not exceed 45°C.¾ The SAGEM F@st™ 1500 must be placed on a desktop.¾ The SAGEM F@st™ 1500 must not be exposed to strong sunlight or excessive heat.¾ The SAGEM F@st™ 1500 must not be placed in an environment subject to significantsteam condensation.¾ The SAGEM F@st™ 1500 must not be exposed to splashed water.¾ The SAGEM F@st™ 1500 casing must not be covered.¾ The SAGEM F@st™ 1500WG and its peripheral devices must not be used for outdoortransmissions.Power supply source¾ The SAGEM F@st™ 1500's mains adapter block must not be covered.¾ The SAGEM F@st™ 1500 router is supplied with its own power supply adapter. It must notbe used with any other adapter.¾ This Class II adapter does not need to be earthed. The connection to the electrical networkmust comply with the information on its label.¾ Use a readily accessible mains outlet near to the router. The power supply lead is 2 m long.¾ Arrange the power supply lead to avoid any accidental disconnection of the power supply tothe router.¾ The SAGEM F@st™ 1500 is designed for connection to a TT or TN system power supplynetwork.¾ The SAGEM F@st™ 1500 is not designed for connection to an IT system electricalinstallation (power supply with separate neutral).¾ Protection against short circuits and leaks between phase, neutral and earth must beprovided by the building's electrical installation. The power circuit for this equipment must befitted with 16 A overcurrent protection and differential protection.¾ The mains connection must be via a readily accessible, switched wall socket.Maintenance¾ The casing must not be opened. This must be done only by personnel qualified andapproved by your supplier.¾ Do not use liquid or aerosol cleaning agents.¾ Never open the mains adapter block; this can expose you to mortal danger.