Safeway SNUG 'N SAFE Installation Instructions Manual

Safeway SNUG 'N SAFE Installation Instructions Manual Manual pdf 1 page image

15.Pull the diagonal section of the seatbelt around the back of theSNUG 'N SAFE.16.Thread the diagonal section of the seatbelt through the diagonal belt hook as17.indicated in 17.SAFEWAY18 (A). Tighten the seatbelt by first pulling here ...18 (B). and across towards you as indicated.FINAL CHECKLISTNo matter how well the child restraint seat has been designed, ultimately yourchild's safety depends on you. Read this final checklist once you have fitted theSAFEWAY SNUG 'N SAFE in your car.- Have you correctly adjusted the harness to suit your baby and the clothinghe/she is wearing?- Have you correctly fitted the adult seatbelt around the SAFEWAY SNUG 'NSAFE?- Have you removed all the slack from the adult seatbelt?Ensure that the straps holding the SAFEWAY SNUG ‘N SAFE are tight.Your SAFEWAY SNUG 'N SAFE should now be secure.Consult the final checklist that follows.To remove the SAFEWAY SNUG 'N SAFE from your car simply unthread theseatbelt from the diagonal belt guide and unfasten the seatbelt.SNUG 'N SAFECAR SAFETY SEATSNUG 'N SAFEINSTALLATION INSTRUCTIONSFor babies up to 10kgIMPORTANT NOTESREMINDERWARNINGEnsure - that you follow the fitting instructions carefully.Ensure - that you store these instructions in a safe place for future reference.Ensure - for maximum safety that you keep your baby in the harness whilehe/she is in the SAFEWAY SNUG 'N SAFE.Ensure - that the rigid items or plastic parts are so located and installed sothey are not liable, during everyday use of the vehicle to becometrapped by a movable seat or in the door of the vehicle.Ensure - to position the lightest passenger on the seat behind the SAFEWAYSNUG 'N SAFE if there are no seat belts available in the car. In thecase of an accident a heavier passenger could cause moredamage/injuries to your child than a lighter one.Ensure - that you keep the SAFEWAY SNUG 'N SAFE in a safe place whennot in use.Ensure - that any luggage or other objects liable to cause injuries in the eventof a collision are properly secured.Do Not - place any heavy objects on the top of the SAFEWAY SNUG 'N SAFE.By doing this you could damage the way in which it functions.Do Not - use any objects such as a cushion or pillow to raise the SAFEWAYSNUG 'N SAFE off the car seat, as in the event of an accident theSAFEWAY SNUG 'N SAFE and the car seat belts would not be ableto protect your child as they should.Do Not - leave children unattended in your car even for a short period of time.Do Not - allow people to play or tamper with the SAFEWAY SNUG 'N SAFE.Do Not - leave the SAFEWAY SNUG 'N SAFE on a table or workbench whenused in the home.Do Not - make any alterations or additions to the SAFEWAY SNUG 'N SAFEwithout the approval of the manufacturer or competent authority.Do Not - use the SAFEWAY SNUG ‘N SAFE without the cover.Do Not - replace the seat cover with any other than the one recommended bythe manuafacturer, as it constitutes an integral part of the restraintsperformance.The interior of a vehicle can become very hot when standing in direct sunlight. Itis recommended to cover or remove the SAFEWAY Snug ‘n Safe from thevehicle to prevent it from becoming to hot and burning your baby.In the event of an accident, please replace the SAFEWAY SNUG 'N SAFEand vehicle seatbelts. Although they may seem to be undamaged if youwere to have an accident the SAFEWAY SNUG 'N SAFE and the vehicleseatbelts might not be able to protect your child as they were designed to.The SAFEWAY SNUG 'N SAFE is only suitable for use in listed vehiclesfitted with a 3-point static/retractor safety belt, approved to UN/ECEregulation No.16 or equivalent standard, that comply with SABS 1080.Do not use the SAFEWAY SNUG 'N SAFE in the passenger seat if it isequipped with an airbag.Misuse of the SAFEWAY SNUG 'N SAFE could influence the safety of yourbaby.SAFEWAY products are distributed by :Unimark Distributors (Pty) Ltd.P.O. Box 912-1095Silverton0127Tel : +27 12 804-1793 Fax : +27 12 804-1795E-mail : info@safewaybabies.co.za15 1617 18HOW TO CLEAN THE SAFEWAY SNUG 'N SAFE AND THE COVERAll the parts of the SAFEWAY SNUG 'N SAFE can be cleaned with mild cleaningagents.The cover can be washed in luke warm water with a mild detergent. Do nottumble dry or use any solvents.ABGroup 0

/ 2

Related manuals for Safeway SNUG 'N SAFE