Menu
SAGEMCOM DTR94 User Manual
                                                | |
Contents
| 
DTR94 HD freesat82. Safety recommendationsUse of the recorder is subject to safety measures designed to protect users and their environment.Where to put your recorder?In order to guarantee the correct operation of your recorder, you must:• place it indoors to protect it from lightning, rain, and sun rays,• place it in a dry and well ventilated area,• keep it away from heat sources such as radiators, candles,lamps, etc.• protect it from dampness, place it on a flat surface from where itwill not fall and is out of reach of the children,• avoid violent shocks. Choose a stable, horizontal surface onwhich the recorder will not be exposed to intense vibrations.• do not place anything on top of your recorder (as it would restrictventilation): the ventilation slots located on the casing preventyour recorder from overheating. If you place the recorder in acompartment, leave a space of at least 10 cm on each side and20 cm on the front and back of the recorder,• connect it directly to the mains with the provided cords, the socket must be near the recorder andeasy to access. The use of an extension cable (with multi-points) is not recommended.Warnings and safety instructionsNEVER OPEN THE RECORDER OR THE POWER SUPPLY UNIT! YOU RISK GETTING ANELECTRIC SHOCK.• Use only the power supply unit supplied with the recorder to connect it to the mains.Other practice may be dangerous.• As a precaution, in case of danger, the power supply unit act as a disconnecting mechanismfor the 230 V power supply. That is why it is imperative that you connect the recorder to apower outlet located nearby and easily accessible.• Connect the recorder to the mains in accordance with the indications mentioned on the identificationlabel affixed on the recorder (voltage, current, frequency of electricity network).• The identification label is located under the recorder or on the rear panel.• You must imperatively connect the power supply unit to the recorder before connecting the powersupply unit to the power socket. Ensure the power cord is correctly connected to the mains powersocket and to the recorder. Otherwise, there is a risk of fire and you risk getting an electric shockwhen touching the recorder.• You must imperatively use the recorder in an environment that complies with the followingrequirements:• temperature of between 0°C [32°F] and 40°C [104°F].• ambient humidity of between 20% and 90%.• altitude below 2000 m/ 6562 ft.UG 253443006-C DTR94 HD Freesat UK.book Page 8 Jeudi, 13. octobre 2011 11:25 11 |
Related manuals for SAGEMCOM DTR94
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved