Razor Pocket Mod Owner's Manual

Also see for Pocket Mod: Owner's manual Troubleshooting guide Owner's manual Owner's manual

Contents

Razor Pocket Mod Owner's Manual Manual pdf 4 page image

3Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspectthe contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.Because the Pocket Mod is 95 percent assembled and packed at the factory, there should not be any problems, even ifthe box has a few scars or dents.Estimated Assembly and Set-Up TimeRazor recommends assembly by an adult.Allow up to 15 minutes for assembly.Allow up to 12 hours for initial charge (see page 7 for charging information).WARNING:DO NOT USE NON-RAZORPRODUCTS WITH YOUR RAZORPOCKET MOD.The Pocket Mod has been built tocertain Razor design specifications.The original equipment supplied atthe time of sale was selected onthe basis of its compatibility withthe frame, fork and all other parts.Certain aftermarket products maynot be compatible and will void yourwarranty.Required Tools5 mm and 6 mmAllen Wrenches(Included)Two (2) 13 mm/15 mmWrenches(Included)Spoke Tightener(Included)Product I.D. Code:1. Inside Storage Compartment2. Underneath Frame3. Charger4. UPC Side of Box (not shown)Plastic Bag Contents:• Charger• Tools• Owner’s ManualBEFORE YOU BEGIN3. Charger(Note: Charger design may varyfrom one shown)2. Underneath Frame1. Storage CompartmentUnder SeatThrottleOn/OffSwitchCharger PortBrake LeverKick StandChain Guard