Ratoc Systems CB31U User Manual

Ratoc Systems CB31U User Manual Manual pdf 64 page image

Windows20006. How to install Windows 2000626. Installing Windows 2000This chapter explains how to install Windows 2000 from a SCSI CD-ROM connected to the CB31U.If you upgrade Windows 98, Windows NT to Windows 2000 , refer to Chapter 6-1.If you install a new copy of Windows 2000(Clean Install), refer to Chapter 6-2.If you install Windows 2000, using a Windows 95/98 startup floppy disk, refer to Chapter 6-3.6-1. Upgrade Windows 98, Windows NT to Windows 2000Follow these steps through:1.Connect your CD-ROM to the CB31U first. Then start Windows98/WindowsNT.2.Copy [i386] directory in the Windows2000 CD-ROM to the internal HDD.3.Remove the CB31U and start the [WINNT32.EXE] file in the [i386] directory copied from Windows2000CD-ROM.4.When setup starts, you can see two ways to install Windows2000 on the screen:-[Upgrade to Windows2000(Recommended)]-[Install a new copy of Windows2000(Clean Install)]5.Select [Upgrade to Windows2000(Recommended)].6.Install Windows 2000, following the instructions.7.When you finish installing it,set up the CB31U if you need it.