Radionics READYKEY K6100 User Instructions

Also see for READYKEY K6100: User guide

Radionics READYKEY K6100 User Instructions Manual pdf 1 page image

Windows™ is a trademark of Microsoft Corporation______________________________ K6100 User Instructions ________________________ 1723174-07606-000-A 02/96 Page 1 © 1996 Radionics, IncLogging InIf an ID device has been issued:1. Use your ID device with the desktop administration or Central Network Controller(CNC) reader, the name assigned to this operator will appear in the User namebox.2. If a password is required the cursor will move to the Password box. Type yourpassword (displayed as asterisks) and press ENTER or choose OK to go into theReadykey application icons.If no ID device has been issued:1. Type your User name.2. If no password is required, press ENTER or choose OK to go straight to theReadykey application icons.3. If a password is required, press the TAB key to move to the Password box, typethe password (displayed as asterisks) and press ENTER or choose OK to go intothe Readykey application icons.Note: If issued, the operator ID device must be used to gain access into the system.If the message 'Login Incorrect - Access Disallowed' is displayed then you may havepresented an invalid ID device, typed your name incorrectly or entered the wrongpassword. Choose OK and try using a different ID device or entering the informationagain.Logging OutTo Logout:1. Go to the main Readykey application icons screen2. Choose Logoff from the menu bar.The Login screen is now displayed and no-one else can use the system without firstlogging in. In this state, transactions are still being recorded and you will still bealerted to alarms as they occur.R A D I O N I C SREADYKEY K6100 READYKEY FOR WINDOWS™User Instructions