COPYRIGHT © 2015 RED.COM, INCR E D D S M C M E D I A O P E R AT I O N G U I D E955-0047, REV-R | 3605EJECT MEDIA FROM CAMERA (UNMOUNT)IMPORTANT: To ensure data integrity, media must always be unmounted prior to removal from the camera. Thisensures that power is removed from the digital media and any open data files are closed. Failure to properlyunmount media may result in lost data or corrupted files.While removing an SSD without unmounting first does not damage the media, it does increase the risk of filecorruption. It is good practice to unmount the media if possible before removing or disconnecting. Unmountingthe digital media provides the following benefits: Protects the integrity of your recorded data Mounts clips instantly to your workstation in post productionNOTE: If you remove media without unmounting first, you receive a warning notification: “Media removed withoutfirst ejecting. Data integrity risk”. Always unmount media before physically removing the disk to protect yourmedia and footage.EJECT MEDIA FROM EPIC/SCARLETTo eject media from an EPIC/SCARLET, follow the instructions below:1. Eject the media using one of the following modules:‒ REDMOTE/Touchscreen LCD: Go to Menu > Media > Device > Eject Media.‒ DSMC Side Handle: Press User Key 7 (lowest of the system keys). The default function for this key is EjectMedia; however, you can remap this key.‒ Side media module: Press User Key 1 + 2. The default function for this key combination is Eject Media;however, you can remap this key combination.When media is ejected, Viewfinder output(s) display “Media ejected successfully. It is now safe to removemedia”.2. Remove media from the camera. You must format your SSD (media) before recording to it. Formatting in-camera allows the camera to add the necessary project profile and clip log data.IMPORTANT: Media must always be unmounted prior to removal from the camera. This ensures that power isremoved from the digital media and any open data files are closed. Failure to properly unmount media mayresult in lost data or corrupted files.EJECT ANDFORMAT MEDIA